# 1
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver
The shipping was fast to Canada, but the paint was peeling on part of the product.
Very heavy duty. Will use it with a bike rack I had for another vehicle that had a 2" receiver.
# 2
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise
Thank you for the personal touch on the order. Not many company's do this. This is a good product and a good price. My car sits low and we needed to raise the carrier up. Looks like this will work out.
# 3
Curt Trailer Hitch Receiver Adapter - 1-1/4" (Class II) to 2" - 6" Long
The Curt C45785 1.25 inch to 2 inch hitch adapter seems well-constructed, but does NOT fit the current SPA Volvo OEM 1.25 inch automatic retractable hitch receptacle (mine is on a 2020 V60 Cross country). The lock pin hole doesn't go back far enough to accommodate the pin -- see photo.
Great product from an even greater company. ETRAILER has the knowledge and products to solve most any trailering problem.
# 4
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
This has worked great to reduce my 2" hitch so that I can continue to use my 1 1/4" Thule bike rack, and I like that it doesn't extend out much from the hitch. After my last trip though, the inset separated from the larger piece. I can still use it, but without the smaller piece fixed in place, I can't put it on the car first and then slide the bike rack into it since the smaller piece slides, and it's impossible to line the holes up. It's also rusted more than I expected. It wasn't inexpensive, and I was hoping it would last longer. I've used it for maybe a dozen trips.
Perfect fit BUT the inner tube broke away from the outer tube after about a dozen trips. One small weld on the outside corner is all that holds it on. The small amount of play must have been too much for it. I was even using an anti-rattle lock pin. Very disappointing due to the price point. And now it’s unsafe to use as it could slip right out of the receiver.
# 5
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver (Class II Only)
Product was fairly easy to put on my Honda Civic and works perfectly for what I bought it for which is to haul mountain bikes.
This adapter allows us to use a bike rack we have across all our cars. It is perfect for light duty applications, easy to use and it can be stored in the trunk until you need it. I would definitely recommend it.
# 6
CR Brophy Hitch Extender for 1-1/4" Hitch Receivers - 5-3/4" Long
The opening on the extender is slightly smaller than my bike rack. To get it to fit properly I have to pound it on with a rubber mallet. I will try to file it down a little.
Here in Saskatoon, Canada, I am very pleased to endorse J&J's flagpole holder and hitch mount extension products. Solid construction and beautifully finished engineered pieces. Fitted easily onto my '92 Camaro RS, for Shriner parades. Supporting a worthy philanthropic effort for children.
# 7
Roadmaster Dual Hitch Receiver Adapter, 2" or 4" Drop/Rise
Exactly what I needed. Now able to add storage box and still pull tow Dolly.
Etrailer’s customer is actually customer service. There’s real people who are there to help. Kate helped me get my order the next day after I realized I accidentally switched the billing and shipping addresses on the order form.
# 8
Roadmaster Dual Hitch Receiver Adapter, 2 " or 8" Drop/Rise
Perfect for my application.
Works great! I use it on my motorhome to carry my bikes with a Rocky Mounts Carrier and flat tow my car with my Blue Ox system. It places the bike carrier at an optimal height over the front of the car but my may be different for other bike carriers. Very sturdy and seems to be quality all around.
# 9
Brophy Hitch Reducer and Extender - 2-1/2" to 2" Trailer Hitch - 7" Long
We were looking for a solution to haul our utv when pulling our camper. This extender allowed us to leave the tailgate down and still have enough clearance to not damage the tailgate. Downside--this extender amplifies the amount of movement with the hitch. This is more than a simple hitch clamp could fix. I added several modifications to completely eliminate the hitch movement. We have taken several trips since the installation and no issues with pulling the trailer. We did have to extend the safety chains about 4 links. Overall a good product and it accomplished the goal. As always,etrailer personnel are knowledgeable, easy to deal with and have quick shipments.
The hitch adapter solved my problem of hitting my tail gate while making sharp turns.
# 10
Hitch Adapter 2" to 1-1/4" Trailer Hitch Receiver - 7" Long
Fantastic Product. Saved me from having to buy a brand new bike holder for my new car with a different hitch size.
Professional, delivered a day early. As promised. What more can you want.
# 11
Curt Hitch Extender for 2" Trailer Hitches - 14" Long
The items I ordered will allow me to adapt my utility trailer for transporting my sea kayaks. Curt and Hopkins are both quality manufacturers. On a shipping note, the box arrived at the Post Office broken wide open. Your shipping folks need to wrap small, heavy, items in bubble wrap. Then stabilize it with foam peanuts. Just putting it in a box then stuffing the box with craft paper does not cut it. Items were not damaged so I am good to go.
Works great and reasonably priced. etrailer Customer Service is absolutely the very best. My first shipment arrived missing the hitch extension. Customer Service quickly responded to my communications and shipped a replacement the same day. As you can see from the photo the hitch extender is perfect for my Polaris Ranger and allows me to use my small lawn n yard implements. I highly recommend etrailer.
# 12
Hitch Extender For 2" Trailer Hitch Receiver 14" Long
This is a very well built extension, just what I needed, great service and fast shipping. Thanks etrailer
It works great,by moving the trailer back from the vehicle you can load longer items,so there are not hanging over the back of the trailer. It also helps in the backing of the trailer. Thank You
# 13
Malone 2" Dual Purpose Hitch Receiver
Used the Malone 2" Dual Purpose Hitch Receiver to have a bike rack with two bikes on the upper Receiver and a 21' bassboat on the lower Receiver. Ran down to Florida Everglades, Florida Keys and back home. Almost exactly 4,000 miles. Hitch worked perfectly. I did find that you can not "jacknife" the boat as much or the bow of the boat will touch the bikes on the rack but that is to be expected. Hitch was quiet, strong and exceeded my expectations. Easy to install and looking forward to using it again in a month for another 4,000 mile road trip. Note: I drive fast and the roads are not always perfect. This is a sturdy Hitch Receiver. Hope this review helps you. Sorry, crummy photo as the Receiver is a "set it and forget it" product. Be well.
Heavy duty. Probably overkill for our e-bike rack but we needed it lower. Thanks for the fast delivery.
# 14
MaxxTow Trailer Hitch Receiver Adapter - 2" to 1-1/4" Hitch - 11" Long
Easy company to order trailer hitch parts from. Quality and precise fit as advertised in their easy to use online shopping guide.
Installed my 2” hitch but don’t have a 2” bike trailer yet. I purchased this to continue to use my 1.25” bike trailer (until I find a deal). Used this over Thanksgiving weekend on I35 in Texas (tons of traffic)and I’m very pleased with the performance. I’m was secure and bikes traveled just fine.
# 15
Hitch Extender For 2" Trailer Hitch Receiver 7"
Allows me to use my back rack and small boat trailer without having to remove the spare tire on my Jeep Wrangler. Works well.
I needed my bike to clear my bumper on a front hitch and this did the trick. This extender is hollow so I was able to use anti rattle/ lock before adding bike rack.
# 16
Trailer Hitch Adapter - 1-1/4" to 2" Hitch - 4-1/2" Drop/5" Rise - 6-1/2" L
I was looking for something like this for my 1 1/4 Reciever. My biggest concern was your 2 inch Adapter would hit the Car's rear Rubber Bumper....it cleared by 1/4 inch on my 2016 Ford Focus, so I'm happy. I think I purchased the Trailer Hitch from your company, and use it for a Bicycle Rack. With this Adapter, I can look into other Hitch Accessories.
Perfect and simple item. It was easy to install. I purchased an accessory with receiver opening of 2” and my jeep had 1 1/4 receiver.
# 17
Roadmaster Dual Hitch Receiver Adapter for Tow Bars - 2" Hitches - 2-1/4" Rise/Drop
Beefy. I have no doubts of the capacity of either side of this hitch adapter, there's plenty of weld to hold it all together. Very few options will provide minimal drop (for an off-road trailer) and minimal rise on the other side for an additional bike rack or cargo carrier. Jeeps are tough since you need to be able to open the gate. This one clears no problem. My spare is up on a slant back carrier, but I think the stock spare should clear as well. Get you a "Trimax THC200 Universal Anti-Rattle Clamp Fits 2" Hitch" and this thing is solid as stone.
The hitch has held up over Alaskan roads towing a jeep, but it does not sit level in the receiver so the tiny little bit that it sags is exaggerated when the tow bar is connected. Paint starting to peel with wear after a year.
# 18
Roadmaster Dual Hitch Receiver Adapter with 2" or 6" Drop/Rise
Worked out great for my family bike adventure. Traveled with that setup over 1000 miles and it was easy drive. I had cargo carrier on the bottom and bike rack on top, and with that setup and 4 people on board still plenty of ground clearance 11". Dual hitch is a solid piece of steel that can carry a lot of lbs. Just don't overload max. tong weight, need some room for safety!
This adapter design was exactly what I was looking for. I often carry 4 or more bikes with my Sylvan GO. The pictures show how I configured my setup. Its perfect!!! And yes, I have to be a little careful on really tight turns but its never been an issue. Thank you George and the etrailer team.
# 19
Trailer Hitch Receiver Adapter 1-1/4" to 2" Hitch - 6-1/2" Long
I put a 1.25" trailer hitch on a Ford Fusion Hybrid so I could mount one of my cargo baskets that require a 2" hitch on it. It worked fine to allow for this.
Fit perfect finish has held up great .
# 20
Roadmaster Dual Hitch Receiver Adapter, 2" or 10" Drop/Rise
Great product
I love the product not just for the obvious reasons such as it’s extremely durable and well made for safety but specifically for length of the arm. The arm length is just long enough to clear my hitch rack walls, which allowed me to plug in my bike rack. I would certainly recommend this product to others. I haven’t seen any marketing for this specific use case so have at it.
What our customers are saying:
"very easy to shop"