Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick

See what our Experts say about this Roadmaster Base Plates

• How To Use Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar with Jeep D-Rings
  In order to use the Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar part # RM-422 with aftermarket d-rings on a Jeep you'll need to add the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars part # RM-035 for 3/4" thick or part # RM-035-1 for 1" thick.
  view full answer...
• Dimensions of the 1" Roadmaster Tow Bar Adapter item # RM-035-1
  The space between the ears of the Roadmaster Adapter for Jeep D-Ring Bumper Mounts item # RM-035-1 is slightly more than 1" to fit D-Ring tabs that are 1"thick. The hole for the pin is 1" in diameter. The pin itself is 7/8" in diameter. I have attached a diagram I made below to illustrate these measurements.
  view full answer...
  
• D-Ring Adapter for Aftermarket Bumper and Falcon 2 Tow Bar on Jeep CJ-7
  Are you sure the D-rings on your bumper are 5/8" thick? I only ask because that is an uncommon size so you may just want to verify you have 5/8" as opposed to the more common 3/4" D-rings. If it turns out you do in fact have 3/4" thick D-rings then what you would need is the Adapter for Jeep D-Ring Bumper Mounts # RM-035-1, which will work with your Falcon 2 # RM-520 tow bar.
  view full answer...
  
• Parts Needed to Flat Tow 2018 GMC Sierra 1500 and 2015 Jeep JK Wrangler Unlimited with Diesel Pusher
  Thank you for all of the details and the picture! Since you will be interchanging between flat towing the 2018 GMC Sierra 1500 and the 2015 Jeep JKU there are some parts that we can use interchangeably between the two. I will give you a list of parts and highlight what parts are for which vehicle: 2018 GMC Sierra 1500 Roadmaster Direct-Connect Base Plate Kit - # RM-3177-3 Hy-Power Diode Wiring Kit - # RM-152 Connector - # RM-910030-7 Bracket - # RM-910030-5 Automatic Battery Disconnect...
  view full answer...
  
• Recommended Jeep D-Ring Bumper Mounts for a Roadmaster 5250 Tow Bar
  Yes, there are a couple of adapters that will work with the Roadmaster Falcon 5250 tow bar and connect to the welded rings on your aftermarket bumper. For 1" rings you will want the Adapter for Jeep D-Ring Bumper Mounts item # RM-035-1. For 3/4" rings you will want the Adapter for Jeep D-Ring Bumper Mounts item # RM-035. You will want to confirm your bumper is rated to be flat towed with. I have listed some other parts you will need to flat tow your 2015 Jeep Wrangler Unlimited below. Tow...
  view full answer...
• Can Roadmaster Tow Bar Connect to Jeep Wrangler with D-Rings on Off Road Bumper
  Roadmaster has D-Ring adapters for their base plate kits like with the # RM-035 for a 3/4 inch thick D-ring, part # RM65FR for a 1 inch D-ring adapter that is extended or the part # RM-035-1 for a 1 inch thick D-ring standard length. This would work great with any of their coupler mounted base plate kits like the # RM-520.
  view full answer...
• Compatible D-Ring Adapter For Flat Towing Jeep With Smittybilt Bumper With Falcon 2 Tow Bar
  It is possible for you to use the D-rings on your 2015 Jeep Wrangler bumper with the Roadmaster Falcon 2 Tow bar part # RM-520 with the adapter part # RM-035-1 if your D-rings are 1" thick or part # RM-035 if your D-rings are 3/4" thick. I have attached a couple very helpful video for your reference. Please keep in mind your aftermarket bumper does need to be rated for flat towing. According to Roadmaster, Smittybilt is the only aftermarket bumper manufacturer that they know of that approves...
  view full answer...
  
• Does The Rampage Rock Rage Bumper Have Add-On D-Rings And What Is Needed To Flat Tow A 1999 Jeep TJ
  The Rampage Rock Rage Front Bumper for Jeep # RA97801 doesn't have a D-ring add-on option so you'd have to have a qualified fabricator weld D-rings in to the bumper if you wanted them. You'd also need to have that fabricator ensure that the bumper is properly secured enough to the frame to be able to tow from the D-rings. If you end up being able to tow from the D-rings then you'll want either the Roadmaster # RM-035 (3/4" thick D-rings) or RM-035-1 (1" thick D-rings) and a Roadmaster...
  view full answer...
• Parts Needed To Flat Tow A 1999 Toyota 4Runner SR5
  Sounds like you are putting together a fun vehicle. I recommend checking the GVW of your SupperTruss hitch to make sure it is capable of handling the weight of the 4Runner. If it is capable of towing your 1999 Toyota 4Runner I recommend the following items: Item # 1148-3 is a simple bolt on base plate that can be removed when your new bumper is added. This base plate works with 2wd and 4wd models. The cross bar brackets can be removed when not in use. Item # RM-576 is the Sterling all...
  view full answer...
• Compatible D-Ring Mount Adapters For A Demco Commander Tow Bar
  I confirmed with Demco that your Demco Commander II Non-Binding Tow Bar # DM9511012 is compatible with the Roadmaster's D-Ring Adapters # RM-035 and # RM-035-1. Their tech did state that you would most likely need some additional bushings to fill in the gap because the arms of the Commander are a bit thinner and that these would need to be sourced locally at a hardware store. I do also want to highly stress that you must ensure that your bumper is rated to tow from. If it is not stated...
  view full answer...
• Off-Road Bumper Adapters For Flat Towing a 1997 Jeep Wrangler TJ
  Currently none of the aftermarket bumpers we carry are rated for flat towing with your 1997 Jeep TJ. We only carry the adapters for either Blue Ox or Roadmaster tow bars which will allow you to connect to an aftermarket bumper which is rated for flat towing. Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars - 7/8" D-Rings # BX88357 Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars - 1" D-Rings # BX88358 Adapter for Jeep D-Ring Bumper Mounts...
  view full answer...
• D-Ring Tow Bar Adapter For Demco Tow Bar & Jeep Wrangler Off-Road Bumper
  You can use a Demco tow bar with Roadmaster D-Ring bumper adapters, and we know will work for a tow bar is the Demco Commander II Non-Binding Tow Bar # DM9511012. They told us that you could need some added bushings as the arms of the Commader are a little thinner than the arms of the D-ring adapters; bushings can be found at any local hardware store and may not be needed, but I wanted to mention as something to keep in mind. Then what you will need are Roadmaster D-ring adapters, which...
  view full answer...
• How To Flat-Tow 2006 Jeep Wrangler with Aftermarket Front Bumper
  In order to flat-tow a 2006 Jeep Wrangler with aftermarket bumper and welded on d-rings you do have some options. The Jeep D-Ring Bumper Mounts part # RM-035 for 3/4" thick d-rings and part # RM-035-1 for 1" thick d-rings is the best option which will then work with the Roadmaster Falcon 2 Tow Bar part # RM-520. I have attached a list of other parts as well below: RoadMaster 68" Single Hook, Coiled Safety Cables part # RM-643 Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part...
  view full answer...
• Recommended D-ring Bumper Mounted Adapter For Tow Bars on 2017 Jeep Rubicon Unlimited
  With an off-road bumper, we do have mounts that attach to the shackle mounts on your bumper where the D-rings are attached. So you have that option as well as the # 1444-3 baseplates you mentioned. For your 2017 Jeep Wrangler Unlimited Rubicon, I recommend the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick # RM-035-1 is what you want for 1 inch thick D-ring bumper mounts or the # RM-035 if you have 3/4 inch thick D-ring bumper mounts. I've attached...
  view full answer...
• Base Plate For 2015 Jeep Wrangler Unlimited w/ Factory or Off-Road Bumper & Falcon 522 Tow Bar
  You can definitely flat tow your 2015 Jeep Wrangler Unlimited with the tow bar you have, the Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522, though with the standard factory bumper a base plate is needed. It is not made to be connected to the D-rings or flat towed with. However, if you want to add an off-road bumper with D-rings you can do so and use the adapter. I'll go ahead and list out the options for you: - Standard Factory Bumper: Roadmaster Direct-Connect Base Plate...
  view full answer...
• Adapter to Flat Tow a 2009 Jeep Wrangler with Aftermarket Bumper with D-Rings
  We do have adapters so that the D ring bumper on your 2009 Jeep Wrangler will be compatible with a tow bar, but you will need a new tow bar. The adapters that will allow you to flat tow your Wrangler come from Roadmaster. Blue Ox tow bars and Roadmaster base plate kits already require an adapter to be used together. The adapter for your bumper is not compatible with the Roadmaster Base Plate/Blue Ox Tow Bar adapters. The Roadmaster Adapter # RM-035 will attach to 3/4 inch shackle mounts...
  view full answer...
• Can I Use Falcon 2 Tow Bar To Flat Tow 2019 Jeep Wrangler With D-Rings
  The Falcon 2 will work with D-rings aftermarket bumper on the 2019 Jeep Wrangler Sport-S with the use of the D-ring adapters. However, you do want to be sure the bumper is rated for flat towing before you try to flat tow to avoid frame damage. If the brackets attach to 3/4" thick shackle mounts on the bumper you need the adapter part # RM-035. If the brackets attach to 1" thick shackle mounts on the bumper you need the adapter part # RM-035-1. I have attached a video for your reference....
  view full answer...
  
• Recommended Parts To Flat Tow A 2002 Jeep Wrangler Behind A Motorhome
  For your 2002 Jeep Wrangler, we need to start with base plates for tow bar. If you have the off-road bumper with 1 inch D-rings, you will need the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick, # RM-035-1. However, if you have the off-road bumper with 3/4 inch D-rings, you will need the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 3/4" Thick, # RM-035. The 3/4 inch thick or 1 inch think referes to the tabs...
  view full answer...
• What Bumper Can Be Used To Flat Tow A 2020 Jeep Wrangler Unlimited Sport S And Hold A Winch
  In my experience most of the bumpers that allow for a winch block the ability to install a baseplate, unless you get a bumper with D-Ring mounts that is approved for flat towing. It's very hard to find a bumper that's rated for flat towing so I recommend reaching out to Smittybilt since they are one company that I've seen rate their bumpers for flat towing. From there you can use a D-Ring adapter like part # RM-035 (3/4" thick D-Rings) or # RM-035-1 (1" thick D-Rings) along with a Roadmaster...
  view full answer...
  
• Roadmaster Adapter Recommendation for Connecting Sterling Tow Bar to D-Rings of Aftermarket Bumper
  Before you order that front bumper you should check with the manufacturer to make sure you can flat tow the vehicle using the D-rings on the front of it. If so you should then ask what the thickness of the D-rings is. If they are 3/4 inch then the Roadmaster D-Ring adapter part # RM-035 would be what you'd need. If they are 1 inch thick instead you'd want the part # RM-035-1. I can't post the picture you send up due to copyright issues but judging by the location of them they should work...
  view full answer...
• Parts Needed to Flat Tow a 2005 Jeep Wrangler with D-Rings on Smittybilt Front Bumper
  The front bumper on your 2005 Jeep Wrangler does resemble the Smittybilt XRC. If that is what you have then you actually won't need a base plate kit as you can use D-Ring adapters to flat tow your Wrangler. We have verified this with Smittybilt in the past. What you will need is either the Roadmaster 1" D-Ring Bumper Mounts # RM-035-1 or the 3/4" D-Ring Bumper Mounts # RM-035 and then a compatible tow bar like the Falcon 2 # RM-520. If you don't already have safety cables then I recommend...
  view full answer...
  
• Jeep D-Ring Adapter Recommendation for 1 inch Thick D-Ring with 7/8 inch Diameter Hole
  Based on what you listed the correct Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars is the part # RM-035-1 which fits D-ring adapters that are 1 inch thick and also comes with sleeve fittings to also fit a 7/8 inch diameter hole.
  view full answer...
• Parts Needed to Flat Tow a 2017 Jeep Wrangler
  In order to flat tow your 2017 Jeep Wrangler Sport you may be able to just attach a tow bar if you have the Off-Road bumper with 1 inch D-Ring bumper mounts you would use # RM-035-1 or for 3/4 inch D-ring bumper mounts you will need # RM-035. If you do not have those D-ring bumper mounts I recommend the Roadmaster EZ5 Base Plate Kit # RM-521448-5. For a tow bar with any of the aforementioned base plate kits I recommend going with the Roadmaster Falcon 2 Tow Bar # RM-520 because of how...
  view full answer...
• Roadmaster Base Plate Kit Solution to Flat Tow 2019 Jeep Wrangler Unlimited with Spyder Bumper
  You could use the D-rings on the front of your bumper to flat tow your 2019 Jeep Wrangler Unlimited with the part # RM-035-1 if they are 1 inch or part # RM-035 if they are 3/4 inch which would work great with the Roadmaster Flacon # RM-520.
  view full answer...
  

Do you have a question about this Base Plate?