Replacement 13 mm SpeedLink Mounting Hardware Assembly for Thule SnowPack Ski and Snowboard Carrier
(49 reviews)
Price: $40.74
In Stock
Replacement 13 mm SpeedLink Mounting Hardware Assembly for Thule SnowPack Ski and Snowboard Carrier
Item # 7521241001
Retail:$47.00
Our Price: $40.74
You Save: 13%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (49)
- Q & A (0)
- Videos (1)
- Photos
Thule Accessories and Parts - 7521241001
- Ski and Snowboard Racks
- Mounting Hardware
- Thule
- SnowPack
Replaces (1) 13 mm SpeedLink mounting hardware assembly for your Thule SnowPack ski and snowboard carrier (TH7324, TH7325, or TH7326).
Features:
- Replaces a 13 mm SpeedLink mounting hardware assembly for your Thule SnowPack ski and snowboard carrier (TH7324, TH7325, or TH7326)
- Quantity: 1 mounting hardware assembly
1500056283 Replacement 13 mm Speed Link Mounting Hardware Assembly for Thule Snowpack Ski and Snow Board Carriers
Replaces 7521241001
Video of Replacement 13 mm SpeedLink Mounting Hardware Assembly for Thule SnowPack Ski and Snowboard Carrier
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Thule Ski and Snowboard Rack Connectors - 7521241001
Michael: Hi there. I'm Michael with etrailer.com.Today, we're going to take a quick look at the Thule Replacement 13 millimeter SpeedLink Mounting Hardware Assembly. This is going to replace the 13 millimeter SpeedLink Mounting Hardware Assembly for your Thule SnowPack Ski and Snowboard Carriers.So it is going to work exactly like the original that came with your ski and snowboard carrier. It's going to give you the rubber coated, stainless steel strap here, that's going to tighten around your crossbars with the turn of the knob here on the end, so that you can easily get this mounted onto your cross bars whether they be the Thule AeroBlade bars or just about any other bar because of its universal design here.This is going to allow tool-free installation on your roof rack system and you're not going to have to worry about getting any tools or anything. Just like the original, this is an exact replacement from Thule, so you can trust it's going to work well for your needs. So if you are needing a replacement, this is going to be the piece for you.So that's going to complete our look for today.
Again, I'm Michael with etrailer.com. Thanks for watching.
Customer Satisfaction Score:
85% were satisfied with this product
15% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
Replacement 13 mm SpeedLink Mounting Hardware Assembly for Thule SnowPack Ski and Snowboard Carrier - 7521241001
Average Customer Rating: 4.6 out of 5 stars (49 Customer Reviews)
Replaces (1) 13 mm SpeedLink mounting hardware assembly for your Thule SnowPack ski and snowboard carrier (TH7324, TH7325, or TH7326).by: Krista02/28/2024
I bought a used Thule ski rack off of Facebook Marketplace, but the mounts that it came with didn't work for my roof rack. I bought these and held my breath, but they are awesome and fit perfectly! I love the fact that they're lockable too and buying locks off of [online] was cheaper than I expected. These are great and I wouldn't hesitate to buy them!
by: Omar02/23/2024
The description wasn’t clear. I thought these were sold as a set and not individually. After getting the one in the mail I now need three more at $XX.XX a pop. Totaling $XXX and some change ….which that’s half the price a new Thule ski rack with the mounts.. this makes no sence!
by: Ryan 01/23/2024
Mounts fit perfect. Great service and a high quality product.
by: Peter 07/01/2023
I took the innards of this part and used them to repair a similar speedlink for the SUP taxi. All the parts inside are identical.
by: TJ12/29/2022
I have had to replace this mounting hardware as my originals wore out. etrailer had/has the exact piece I need each time. Very quick deliver and product functions perfectly. Certainly beats buying a new ski rack!
by: Kara12/08/2021
One of the items came with a piece of paper taped to it. When I tried to take off the paper, the glue residue stuck to the assembly. Not sure why that item was shipped in that state.
by: Jerry 12/24/2020
what a great place to do business, you can track your shipment across the country and when you are told it will be there a certain day you can plan on it being delivered. I was having trouble finding repair parts for my ski rack,looked on etrailer and in a few, days problem solved .
Jerry
12/25/2021
No problems at all
by: Dez01/10/2023
Arrived in great shape and the quality is great. Did have to replace the mounting bolts with a longer one for it to work on my older Snowpack 6 rack which took some work, glad I'm mechanically inclined.
by: Chris B06/29/2018
I recently ordered your Replacement SpeedLink Mounting Hardware Assembly for Thule SnowPack Ski and Snowboard Carriers Item # 7521241001; I felt like I was taking a bit of a risk because you webpage description did not list the mount (Thule 810XT Sup Taxi Paddle Board Carrier) I was putting the parts on. I wanted to write you and tell you that the parts fit perfectly, as an engineer I did disassemble the components and the build quality is the exact same as the Thule parts. Thank you for offering such great replacement parts, with out them I would have had to purchase a new Sup Taxi because one component failed.
by: Travis 11/09/2021
My Thule hardware stripped out last season and they wanted $199.99 for the Thule replacement hardware at my local ski shop. I searched etrailer and found these so I ordered thinking they'd be a subpar chinese part but would suffice. I've received my order today and was surprised as these are literally the same piece of hardware Thule offers at a fraction of the cost. The quality is great and the shipping was quick. This is a no brainer for the price!!
by: Thom C06/20/2018
etrailer website easy to use and great service. largest Thule parts provider i've come across. used these replacement speedlink mounting assemblies with a small modification for mounting my fly fishing rod carrier to my roof rack for easy/secure on/off compared to tedious bolts and hex wrench system. perfect solution.
by: Richard B02/04/2020
Great contection for my ski rack. Universal fit, easy to use.
Richard B.
2/6/2021
WE just got it as it was back ordered for month. But etrailer keep us up to date. These aproducts are very hard to find as covid has created a run on bikes and related stuff. It VERY heavy. Seems extreamely sturdy and able to carry two ebikes. WELL MADE AND DESIGNED.
by: Sam05/24/2022
My sup taxi’s mounting leg broke and this piece allowed me to fix it and keep using it. Delivery was quick and the part is exactly what I needed.
by: Josh02/20/2022
Used these on my ford explorer because the original mounts didn’t have enough clearance between cross bar and moon roof. Worked great, shipped fast and saved me from having to buy new racks.
by: Greg 12/17/2020
Product arrived timely and in great shape. My ski racks mounted up with them perfectly! One tip, make sure you unscrew the strap all the way out if it seems like it's too short to fit around your rack. It extends out a pretty good amount to fit any rack (I have wide aero bars and it fits just fine).
by: Roger 02/26/2021
worked like a charm---received it faster from e-trailer than I could get from my local dealer who had to special order from the manufacturer for Thule
by: Lance07/08/2020
I didn't know that it doesn't come with the key lock and the bolt is to short
to tighten onto the ski racks.
by: Julio07/03/2018
So far the product has worked great, it is indistinguishable from the old Thule part that they are replacing, and the locks fit very well.
by: Brian11/12/2018
Haven't hooked it up, but looks like a perfect match. Very pleased and excited to hook up to my roof rack. Will try and update once I can install-which will probably bring it to 5 stars
by: Larry 01/12/2023
Thanks for the quick response and the prompt delivery
by: Richard 10/04/2020
Exactly what I expected and needed. Excellent first experience with etrailer.com.
by: Christopher01/30/2020
First time buyer- I’m impressed by the service, speed and quality.
Well done team!
Thank you
I’ll be back....
Chris Hodges
Denver, Colorado
by: Erik 12/02/2020
etrailer always delivers
by: Annie12/20/2021
It was one. Clip. And it doesn’t have a lock. Poor description. I need all 4….
Sierra K.
12/21/2021
This replaces one 13 mm SpeedLink mounting hardware assembly. This part does not take lock cores and relies on the locking mechanism that locks the carrier arms to have security. The locks are in the upper part of the clamp that carries the skis.
by: John S07/29/2019
Product works perfectly. I wouldn’t hesitate to buy this. Great quality.
25
49
Show More Reviews
See what our Experts say about this Thule Accessories and Parts
- Locking the Replacement Speed Link for Thule Snowboard CarrierThe Replacement SpeedLink, part # 7521241001 does not take lock cores, and relies on the locking mechanism that locks the carrier arms to have security. The locks are in the upper part of the clamp that carries the skis.
view full answer... - Replacement Hardware for Thule Snow Pack To Fit on Aero BarsYour picture didn't make it through but the replacement hardware for the Thule Snow Pack # 7521241001 that you referenced was designed to adapt the older Snow Pack carriers to fit the aero style bars like what you have so this would work for you.
view full answer... - Does Replacement SpeedLink Mounting Hardware # 7521241001 Need Additional Install HardwareThe Replacement SpeedLink Mounting Hardware # 7521241001 does come with the parts needed to install it.
view full answer... - Shorter Speed Link For Thule Snowpack Ski RackYou'd want the shorter 13 mm Speedlink you referenced for your Thule Snowpack with the part # 7521241001 that you referenced.
view full answer... - Will Replacement 13 mm SpeedLink Mounting Hardware Assembly Fit on 67 by 23 mm BarYes the replacement clamp part # 7521241001 would easily fit on a crossbar that measures 67 by 23 mm. It attaches by wrapping around the bar with the strap that is on the bottom of the clamp.
view full answer... - Will Thule SpeedLink Mounting Hardware Fit Older Thule Square CrossbarsThe Thule square crossbars have stayed basically the same over the years so the Replacement SpeedLink Mounting Hardware Assembly # 7521241001 will fit your older Thule bars!
view full answer... - Using SpeedLink Mounting Assembly On Thule Flat Top Roof Ski & Snowboard RackThe SpeedLink Mounting System # 7521241001 is not intended to be used for Thule Cargo Boxes. I recommend using the intended mounting hardware # 7533998 for your Thule Flat Top Rooftop Ski & Snowboard Rack. I cannot guarantee that the SpeedLink System will work.
view full answer... - Compatibility of the SpeedLink Mounting Hardware with the Thule Flat Top Ski RackThe Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks # 7533998 is my recommendation and the original fit for your ski rack to be compatible with factory bars.
view full answer... - Difference Between 20 mm and 13 mm Thule Replacement SpeedLink Mounting HardwareI reached out to Thule and found that the difference between the Replacement 20 mm SpeedLink Mounting Hardware Assembly for Thule SnowPack Ski and Snowboard Carrier # 7521241002 and the 13 mm # 7521241001 is the length of that center bolt/screw. You will need to measure your existing bolt in order to find which of these matches what you have and choose the correct replacement. They also said that from 2011 to 2016 a lot of the models used a rivet instead of the bolt. If that is the case...
view full answer... - Does The Replacement 13mm SpeedLink Monting Hardware Assembly Fit Thule AeroBlade Crossbars?Yes, the Replacement 13 mm SpeedLink Mounting Hardware Assembly for Thule SnowPack Ski and Snowboard Carrier # 7521241001 for the Thule SnowPack Extender Ski and Snowboard Carrier # TH7324 will fit on the: Thule SnowPack ski and snowboard carrier TH7324, TH7325, or TH7326.
view full answer... - What Mounting Hardware Kit Do I Need for Thule Ski Rack on 2010 Audi Q5 Factory Aero Bars?The Replacement SpeedLink Mounting Hardware Assembly for Thule SnowPack Ski and Snowboard Carriers # 7521241001 or the Mounting Kit for Thule Pull Top Rooftop Ski and Snowboard Racks # TH7520970001 will be compatible with the aero style bar. Either of these options will work with the factory bars on your 2010 Audi Q5.
view full answer...
- Replacement SpeedLink Mounting Hardware For Thule SnowPack Extender # TH7325The Thule SnowPack Extender # TH7325 will use the 13 mm SpeedLink Mounting Hardware Assembly # 7521241001. As the # 7521241001 is listed as a replacement part it will only include 1 assembly. If you need all 4 feet you will need to order a qty of 4.
view full answer... - Mounting Hardware Needed To Mount Thule SnowPack To 2019 Subaru Forester Factory BarsAll you need to attach the Thule Snowpack to a non Thule bar would be the SpeedLink Mounting Hardware Assembly # 7521241001. This will be all you need unless you have square bars. If you have square bars you will need the Thule SquareBar Adapter # TH8897
view full answer... - Mounting the Thule SnowPack 6 To a 2013 Toyota HighlanderTo use your Snowpack 6, part # TH7326, you shouldn't have to get any special adapters or anything to mount, unless you've previously had it on a different vehicle and used the T-Channel mount. If it's cold outside, the strap can also become a lot less flexible, and lose a little bit of distance. You can let the strap out a little further to make up this difference. If you no longer have the strap style mounts, you can buy individual replacements as part # 7521241001.
view full answer... - Availability of Replacement Top Mounting Clip for Thule Universal Flat Top Carrier 91725I do have an alternative solution for you to carry your skis with a Thule carrier, but unfortunately just as you stated, the top mounting bracket part of your Flat Top Ski Carrier 91725 isn't replaceable. If you still prefer to use a Thule ski carrier then we have the SnowPack # TH7326 which is the upgraded version. This carrier does have replacement mounting kit # 7521241001 which is both the top and bottom should you ever need to replace it.
view full answer... - Lock Cylinders for Thule SpeedLink Mounting HardwareYes, the Thule One-Key System Lock Cylinders part # TH450400 will work inside the Thule SpeedLink Mounting Hardware Assembly part # 7521241001.
view full answer... - Top Mounting Bracket For Thule Flat Top Ski And Snowboard CarrierUnfortunately, the top mounting bracket for your Thule Flat Top Ski and Snowboard Carrier # TH91725 (DISCONTINUED) is not replaceable. I recommend upgrading to the Thule SnowPack Ski and Snowboard Carrier # TH7326. This carrier has a replacement mounting kit # 7521241001 which includes the too and bottom mounting clips shoud you ever need to replace it.
view full answer... - Replacement SpeedLink Mounting Hardware For a Thule SnowPack Extender Ski and Snowboard CarrierThe correct Replacement SpeedLink Mounting Hardware Assembly for your Thule SnowPack Extender Ski and Snowboard Carrier # TH7325 (TH92726) is the Replacement 13 mm SpeedLink Mounting Hardware Assembly # 7521241001. I was able to verify this with the manufacturer.
view full answer... - Replacement for Thule Vintage 586 Ski RackI reached out to my contact at Thule and this rack had custom clamps that attached to the 586 on one side and square bar cross bars on the vehicle. The speed links that you referenced will not connect to the 586, and Thule does not have vintage back stock available for that rack. The closest item offered that will accommodate 4 pairs of skis is the Inno # INTX726, Snow sport Ski and Snowboard Carrier - 6 Pairs of Skis or 4 Boards. Ski rack has key locking mechanisms, and large release...
view full answer... - Removing Lock Core in Thule SpeedLink Mounting HardwareTo remove the lock cores from your Replacement 13 mm SpeedLink Mounting Hardware Assembly for Thule SnowPack Ski and Snowboard Carrier # 7521241001 you will need to use the change key that comes with cylinders like the four-pack of Thule One-Key System Lock Cylinders # TH450400. You shouldn't have to push from the back at all, you will need to insert the change key all the way until you hear an audible click, and the cylinder will be removed. You need to make sure the lock core is unlocked...
view full answer... - Replacement Thule Speedlink for Thule SnowPack ExtenderI checked with Thule and for your Thule SnowPack Extender part # TH7326B the correct replacement Speedlink is the part # 7521241001 which is the 13 mm assembly.
view full answer... - Will the Speedlink Mounting Kit Work On a Thule FlatTop Ski CarrierThe correct replacement mounting clamps/hardware for a Thule FlatTop Ski Carrier is the Mounting Kit part # 7533998. The Speedlink Mounting Kit part # 7521241001 is not a fit nor is there a similar option. In order to use these mounting clamps you'll need to upgrade the carrier to the Thule SnowPack Ski and Snowboard Carrier like part # TH7326.
view full answer... - How To Lock a Thule Flat Top Rooftop Ski and Snowboard Rack To the Roof RackThe Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks part # 7533998 would indeed be able to be removed from the vehicle with just an allen tool. There is not a way to lock this but you should be able to use the Replacement SpeedLink Mounting Hardware Assembly part # 7521241001 which does require a lock for removal and will fit a Thule Flat Top Rooftop Ski and Snowboard Rack. Please note, you would only need one SpeedLink on each arm for security. To lock the SpeedLinks you...
view full answer... - Thule Snowpack 6 Replacement Mounting HardwareI really wish I could tell you confidently that the less expensive Thule Flat Top Mounting Kit part # 7533998 could fit your SnowPack # TH7325 but since it was not designed for use on your ski rack I have to recommend the # 7521241001 which we know will fit. It's also much easier to use and will overall be what you'd be most happy with long term. That said, if you were shipped the carrier without the mounting hardware you should contact who you bought the carrier from as they should make...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Tyler C
Expert Research:
Michael H
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Manda E
Written by:
Matthew S
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Sierra K.
12/10/2021
Customer service will reach out to you.