Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Adjustable bracket lets you mount an antenna in the top channel of a crossbar or Rhino-Rack Pioneer platform. Folding design, with 180 degrees of rotation, provides extra clearance for city driving. Includes installation hardware.
Features:
Specs:
Average Customer Rating: 4.9 out of 5 stars (55 Customer Reviews)
Adjustable bracket lets you mount an antenna in the top channel of a crossbar or Rhino-Rack Pioneer platform. Folding design, with 180 degrees of rotation, provides extra clearance for city driving. Includes installation hardware.Best antenna mounting solution out there. Works perfectly with Thule wing bar evo crossbars. The antenna kit comes with an assortment of mounting plates and fasteners so you could configure what works best for your situation. Build quality is top notch, mounting it into the crossbar channels make it very secure/ anti theft and the adjustable angles make for getting into spaces with lower clearance. Definitely recommend this one.
Ordered this to attach weBoost Reach OTR to my Prinsu rack on my 2012 Tacoma. IT WORKS PERFECTLY!!!. It is well made with thick metal and easy to use. Hardware was complete and clear instructions. Every part lines up as it should. Rare these days.
Just used standard 1/4” x 1-1/4” carriage bolts and 10 minutes to install. Bolts provided will not fit my rack but a quick mod is all that is needed. (Made for a Rhino-Rack)
I was after the fold down feature of the bracket so that it was out of the way when not needed and the multiple adjustment points was a plus. Lockdown has some movement so I bought a 3” Quick Fist to stop any rattle while driving.
Approximately 100 miles of driving and no issues so far. Great job Rbino-Rack and great job to etrailer for having it in stock!
We found this to be the best way to install whip lights on our Rhino-Racks
Worked perfectly on our roof rack for our cell antenna booster. Now I can easily fold down the antenna to enter our garage! While I had planned to use my own hardware, the 2-hole M6 plate worked well in the channel by filling a slight bevel on the corners. I liked that better and went with that instead.
Purchased for a Wilson 4G antenna on top of our camper so we could lower the antenna when not in use due to the already tall vehicle. Works great no issues after a year of use. It's very stout and has held up well. Recommend a little anti seize on the stainless wing nut to keep it lubed.
It’s decent quality and fits the Rhino-Rack systems, but it’s way overpriced! The folding antenna does exactly what you’d expect. It’s made of heavy gauge steel, parts have a pretty good finish, albeit there is some lite surface rust on some of the stainless steel hardware. Ultimately it works as intended with Rhino-Rack systems, but the cost is ridiculous. A year later and I still have a bit of buyers remorse. I would have loved to find a more affordable alternative that wasn’t some low quality piece of junk. I was traveling for work and didn’t have access to my shop and tools when I made the purchase. If I had been at home I’d have built my own solution for a fraction of the price.
First Let me just say this product is built very well and the quality is awesome , this is my second one the first was too install my cell phone weBoost OTR antenna on my overland trucks roof rackand and my second one was to mount my Midland GMRS MXAT04 47" antenna on my front bumper and they function great. Thank you for providing a great product and shipping it in a timmly matter.
Nice used it for mounting a weboost antenna. Love the way it angles. Great mount
David
7/12/2022
Great still using it. No problems with it and in fact just purchased another one for my other truck. I would like to see the keeper screw a little different. I like to keep it in. But if I need to go to car wash I have to unscrew it and hope I dont it. That is the only issue I see. Maybe switch that to a pin or something.
It took 6-months to get this product. Excellent build quality, very sturdy and fairly flexible mounting options (uses M-6 bolts). I'm using it to mount my WeBoost Antenna on my Van. etrailer did a good job keeping me informed about the delays.
I didn't give it 5-stars because I would have liked M8 sized holes so I had to use a step bit and repaint :(
Does exactly what it says. The mount feels solid, and it's easy to adjust. My only complaint is the locking screw has rusted and is tough to turn.
Excellent solution when you need a fold down antenna mount. Mounted this one on top of my roof rack which allows me to get into the garage without banging up my rooftop antenna.
Keith W.
2/22/2021
After a year, the mount is still looking and working great! Would highly recommend it if you need a solution where your antenna needs to be folded down. I use mine with a GMRS antenna without any issues
Bigger than expected but works perfect. Im going to cut the wing nut down only because its fine thread and sticks inside a 1/2” and will still work cutting it shorter.
Thanks for your patience.
Please find attached a photo I'm finally happy with (as a photographer) of my F150 with the Thule TracRac SR I purchased from you back in November.
It is just simply the best. I'm very pleased with the rack, how solid it is, how versatile it is, as both components can be moved front and back at will or even removed completely. Well worth the money!
Will use this for my WeBoost cell antenna on my F250 mobile RV Technician work truck.
Very well built and nicely finished. I mounted it to a Prinsu roof rack on my 4Runner. I drilled a few extra holes to mount to the Prinsu, but it was easy and worth it to gain the ability to fold my CB antenna when we aren't out on the trails.
great antenna mount heavy enought to even run a self tunning HF antenna, mounted perfectly to my Yakima jetstream bars with included hardware
It works great. Numerous mounting options (with hardware included!) The only very small rub is the thumbscrew hole needs tapping after paint. It is a little pricey but rock solid build.
Exactly what I needed to be able to drop my weboosf antenna down for clearance. Packaged well. Really nice that a variety of hardware is included for different install scenarios.
Product is built so well it sold out. etrailer's Customer Support is so Excellent they provided me with updates on my order every step.
exactly what I was looking for to mount my weboost drive antenna to the roof of my van and be able to lay it down since I use a longer mast.
Great product for cell phone booster !
This bracket is built like a tank. Nothing cheap about it. Buying from etrailer was easy and Justin was great to work with..
Took a bit of configuring but was able to adapt the braxket to my rack and WE BOOST system.
A little pricy for a piece of metal but it works exactly how I wanted it to. Owned it over a year now, no problems.
Very nice looking product, well built and powder coated looks like it will last longer than my jeep. Thank you for the quality product.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Oogsmobile
7/23/2020
After another year of using this antenna mount, its still working great. The powder coating has held up well and other than spraying it a couple times Fluid Film to keep it lubricated, there is very little rust on the mount which is expected considering the salty conditions its exposed to. I would definitely buy this again and have recommended it to a couple frients.