What is the Spacing Between the Rungs on the Stallion Loading Ramp Set # 288-07489

Updated 02/01/2018 | Published 01/31/2018

Products Featured in This Question

Loading Ramp Set - Aluminum - 65" Long x 20-1/2" Wide - 3,000 lbs - Qty 2

(168)

$284.40

Erickson Arched Loading Ramp Set - Center Fold - Steel - 80" Long x 11" Wide - 1,600 lbs

(71)

$282.69

Question:

What is the spacing between the rungs on the ramps? I have a set of ramps but the spacing is too much for smaller front ztr wheels. They get stuck between the rungs when loading.

asked by: Mike

Expert Reply:

The rungs on the Stallion Loading Ramp Set # 288-07489 that you referenced have 3" gaps between them as you can see in the attached photo. My contact at Stallion confirmed this.

If the spacing is too much for you to use and the 3,000 lbs weight capacity is a bit overkill then I recommend using the Erickson Arched Loading Ramp Set # EM07464-2 instead. These measure 80" long x 11" wide and have a combined weight rating of 1,600 lbs. The mesh surface will not have gaps big enough to cause issues with your wheels.

I have attached review videos for both systems that you can check out.

expert reply by: Jon G