To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This hitch has a sturdy wraparound jaw with a locking bar for added security. Pivoting head eases hookup and helps limit chucking. Polyurethane bumpers offer cushion for a smooth ride. Base secures in underbed mounts and removes for full bed access.
Features:
Specs:
The single-piece, strong wraparound jaw completely surrounds your trailer's king pin for 360 degrees of contact. This wraparound jaw provides a more secure connection than standard 2-piece jaws that close in on the king pin from the sides. The increased jaw-to-king-pin contact on the UMS hitch offers tighter tolerances around the king pin, which minimizes both rattle and chucking, for a smooth, quiet ride.
A 3/4" thick solid steel locking bar spans the area in front of the jaw. This bar provides an added barrier of protection against accidental disconnection so you can have peace of mind that your trailer is secure. The locking bar is attached to the jaw and to the spring-loaded handle. The bar automatically locks when the jaw closes around your king pin
The double pivoting, cushioned head improves your towing experience dramatically by helping to reduce jarring and unwanted noise. Built-in pins allow the hitch head to pivot back and forth and side to side. And hookup is easy because the hitch head will automatically pivot to the proper angle when it comes into contact with your pin box.
Three polyurethane dampeners help to cushion the movement from the pivoting head and to reduce towing noise. Two of these dampeners are built into the head assembly to cushion the head's side-to-side pivoting. The third dampener cushions the back-and-forth motion and must be installed in the hitch prior to use. Installation of this third dampener is easy - simply press the dampener up into the pre-drilled hole underneath the hitch head.
This UMS Double Pivot hitch is specially designed to fit in the underbed rails of your Ford Super Duty factory fifth-wheel towing prep package. To assemble the hitch, all you have to do is bolt on the side plates and attach the head to the hitch base.
The side plates have 2 functions. They contain the feet that fit into your OEM tow package receivers, and they allow you to raise or lower the hitch head to better match your pin box height. After you choose your desired height setting, simply bolt the side plates to the hitch base with the included hardware. Then lower the hitch into the 4 puck receivers in your truck bed. Turn the handles to lock the feet into the pucks and secure the handles with the included safety pins. The hitch can be removed to give you full truck bed access. Simply remove the safety pins, turn the handles to unlock the feet, and lift the hitch out of the receivers.
California residents: click here
Very helpful!!!
When I called the support staff was very helpful
Very easy to install!
Working perfect easy to connect and store.
If I ever have to get another one, it will be a Demco
Awesome Price! Great Hitch! Great Company to deal with.
Thank You!
My son and I installed it, Works great! Thanks
Fits perfectly, tows well. No issues after 10k miles or more.
The unit came in pieces, and was easy to assemble. There was some minor trouble in placing it into the puck holes in the bed, but it works great and is easy to hook up and un-hook.
This product is so good I purchased 4 more for my other Chevrolet Silverado's 3500s
It broke 3 months into it. Junk
Fit perfectly and works great!
Haven’t towed anything yet waiting on new trailer. Ordering and service was the best!!! Followed through right to delivery.
Hitch appears to be well-constructed and sturdy. I have not yet installed it. Some assembly is required, and the instructions aren't crystal clear. Better illustrations would be helpful. The videos online are the best source of installation information. Shipping materials lack protection. The powder coating was damaged in a few locations, as well as the instructions. I expect the hitch will operate exactly as designed a long as I protect the exposed parts from the inevitable elements. Rubber grommets would be a nice addition to the holes drilled in the truck bed.
Another excellent product from etrailer. Already used it once and it worked great. Wouldn't go anywhere else for my towing needs.
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.