Are Wing Mounting Brackets Included with Lippert 1621 Pin Box LC1191151

Question

Question:

is the wing set included with the pinbox?

asked by: Kyle N

0

Expert Reply:

Yes the wing set you see in the product pictures of the Lippert 1621HD part # LC1191151 do come with it.

expert reply by: Jameson C

0

Answer 1

The best replacement pin box for the Lippert 1621 on your Grand Design Reflection 303RLS is the Curt Flex Air. This pin boxes has an air spring and shock absorber which will reduce the back and forth chucking (stopping and taking off) and lower the…

view full answer...

Answer 2

Hey Dave, The Curt Helux is still in production and not yet available so I can't 100% confirm it will have a compatible mounting pattern, but it's highly likely that it will. In order to determine what your pattern is you'll need to look…

view full answer...

Answer 3

For your 2018 Reflection 303RLS the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570 would be an excellent option to upgrade and improve the suspension. You'll get a much smoother ride quality due to the shocks…

view full answer...

Answer 4

Hey Paul, between the three part numbers you mentioned of #E34SR, #K71-653-00 and #APUBR-8 you would have all of the needed hardware to install the cushioned equalizers. You wouldn't need anything else.

view full answer...

Answer 5

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 6

The suspension bolts should be 9/16" diameter as these are fairly standardized so if that's what you have I recommend the Wet Equalizer Bolt part #126B2.

view full answer...

Answer 7

I would be happy to walk you through how to determine which replacement components you will need, but you will need to take a few measurements of the components on your trailer. First the #013-144-03 you were looking at measures 7-3/4" from…

view full answer...

Answer 8

Based on the current condition of your Dexter EZ Flex kit it's going to be the best solution to replace the entire kit with the part #K71-653-00. This comes with the two new equalizers you need, all new shackle straps, new bolts, nuts, and…

view full answer...

Answer 9

Hey Dennis, do you know the axle capacity on your trailer? How about the distance between the left and right bolt holes of the equalizer you took off as well?

view full answer...

Answer 10

Hi Mikolaj, We do have the correct replacement for the E-Z Flex equalizer marked 13-144, and what you need is the Replacement Equalizer for E-Z Flex Suspension Kits #013-144-03. It mentions "triple axle" on the product page but the…

view full answer...

Answer 11

Hey Lee, For your specific pin box and bolt pattern we do not have a Curt Helux for it yet. Based off of your photo the pin box on your trailer is going to be the Lippert 1621 model, or the Lippert 1621 bolt pattern. We do have a #LC369535, Curt Flex…

view full answer...

Answer 12

I spoke to Lippert who confirmed your Grand Design Reflection 303RLS uses a Lippert 1621 Pin Box. There, the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box part #GY58GR which is what I recommend using is a fit. Unlike the Reese Goose Box,…

view full answer...

Are Wing Mounting Brackets Included with Lippert 1621 Pin Box LC1191151

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching