To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Easily remove this lightweight hitch when you're done towing and get a totally clean, free bed for hauling your gear. Custom underbed installation kit doubles as a gooseneck hitch so you can tow more than just your camper.
Features:
Specs:
Note: This fifth-wheel hitch is not compatible with rotating pin boxes.
The single-piece, strong wraparound jaw completely surrounds your trailer's king pin for 360 degrees of contact. This wraparound jaw provides a more secure connection than standard 2-piece jaws that close in on the king pin from the sides. The increased jaw-to-king-pin contact on the Recon hitch offers tighter tolerances around the king pin, which minimizes both rattle and chucking, for a smooth, quiet ride.
A 3/4" thick solid steel locking bar spans the area in front of the jaw. This bar provides an added barrier of protection against accidental disconnection so you can have peace of mind that your trailer is secure. The locking bar is attached to the jaw and to the spring-loaded handle. The bar automatically locks when the jaw closes around your king pin.
The double pivoting, cushioned head improves your towing experience dramatically by helping to reduce jarring and unwanted noise. Built-in pins allow the hitch head to pivot back and forth and side to side. And hookup is easy because the hitch head will automatically pivot to the proper angle when it comes into contact with your pin box.
Polyurethane dampeners help to cushion the movement from the pivoting head and to reduce towing noise. These dampeners are built into the head assembly to cushion the head's side-to-side pivoting.
This hitch is designed to attach to the 2-5/16" ball that comes with the included underbed installation kit. The kit is actually Curt's Double Lock gooseneck hitch, so you can tow a gooseneck trailer with this setup as well. When you aren't towing your fifth-wheel trailer, simply remove the Recon hitch and you'll be good to tow. If you're done towing entirely and want your truck bed to be free and clear for hauling, just pop out the chrome ball, flip it upside down, drop it back into the ball hole of the hitch, and use the wheel-well-mounted handle to lock the ball in place. A rubber cover is included to go over the ball hole and keep out dirt and grime.
Gooseneck Specs:
Assembling the hitch is quick and easy because of its lightweight, 2-piece design. First, attach the base to the 2-5/16" ball. A coupler pin is installed underneath the ball and the coupler is tightened to keep the Recon secure. Then simply slide the head assembly into the opening in the base. There are 3 different height settings to choose from - just slide the head up or down to find your desired height.
Once you have chosen your desired height, use the included pin to secure the head to the base. Finally, tighten the bolt to eliminate any movement and rattle.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this Replacement Base Assembly for the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter. This has a 21,000 pound gross towing weight capacity. Now this part will replace just the base assembly that's on the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter, which is part number DM8550045. Now that adapter, we do sell separately on our website. Now this is just for the base assembly.
It does not include the hitch head. The hitch head bolts to this center post here. The hitch head, we do sell separately. It's part number DM6169. The center post right here that the hitch head attaches to, has three different height settings to fit your application.
And the hitch height is critical 'cause when you go to tow your fifth wheel, you do wanna make sure you're towing as level as possible. And hitch height is always measured from the top of the truck bed to the top of the hitch head. And now the hitch height settings on this center post, there's three holes in it. So it gives you a selection of three different hitch height settings. Either a 15-and-a-half inch, 17-and-a-quarter-inch or 18-inch hitch height setting.
You just pick the one that works best for your application. Now, this base also, when you do install this over the gooseneck ball, it does give you a three-inch offset for extra clearance of your fifth wheel. It is is a sturdy steel construction. Has a nice rust-resistant black powder coat finish on it. And it is a quick, simple installation.
Basically, this just installs over the gooseneck ball and it's held in place with the pin and clip. And also these two set screws right up front here. This part is made in the USA and again, the gross towing weight capacity on this base assembly is 21,000 pounds. But that should do it for the review on the Replacement Base Assembly for the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter..
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.