bing tracking image
Q & A Icon

Replacement Trailer Vent Fan, Motor, and Switch  

Question:

I need to replace my Bathroom Vent Fan Motor in my 2004 Winnie motorhome. The motor I have is HC385MG, VD218 105A, 13.6V 1.2A, 3H0412 06. see picture attached I have been reading your web site but am not clear what to order. I would like to replace the following since I will be up there pulling this apart: * Motor * Blade * Rocker Switch * Wires from Switch to Motor What do I order? How do I access the screws that hold the motor to the bracket? Does the fan blade just pop off? Wont the screen be in the way for accessing the mounting screws? Sorry, I am new at this.

0

Expert Reply:

Motor # BVD0218-00 should be the correct replacement. The motor comes with new wires, a bracket, and hardware. The screws that hold the motor to its bracket can be accessed by removing the fan blade. It should just pull off of the motor shaft. You would have to also remove the screen. To remove the screen you may have to remove the ceiling garnish and frame from the inside. It appears you need fan blade # BVD0215-00. For a switch you can use # BL0108-00.

expert reply by:
0
Michael H
click to enlarge

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>