1. Accessories and Parts
  2. Ventline
  3. RV Vents and Fans
  4. Enclosed Trailer Parts
  5. Roof Vent
  6. Switch
Replacement Mini-Rocker Switch for Ventline Ventadome Trailer Roof Vents

Replacement Mini-Rocker Switch for Ventline Ventadome Trailer Roof Vents

Item # BL0108-00
lowest price pledge
Retail:$25.65
Our Price: $9.95
You Save: 61%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.07 lbs
Quantity: 
In Stock
Replacement Mini-Rocker Switch for Ventline Ventadome Trailer Roof Vents Switch BL0108-00
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Replaces a broken mini-rocker switch on your Ventline Ventadome RV roof vent for motor homes and enclosed trailers. Switch operates the fan motor. Call 800-298-8924 to order Ventline accessories and parts part number BL0108-00 or order online at etrailer.com. Free expert support on all Ventline products. Guaranteed Lowest Price and Fastest Shipping for Replacement Mini-Rocker Switch for Ventline Ventadome Trailer Roof Vents. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (10)
  • Q & A (29)
  • Photos
  • Why etrailer?

Ventline Accessories and Parts - BL0108-00

  • RV Vents and Fans
  • Enclosed Trailer Parts
  • Roof Vent
  • Ventline
  • Switch

Replaces a broken mini-rocker switch on your Ventline Ventadome RV roof vent for motor homes and enclosed trailers. Switch operates the fan motor.


Features:

  • Operates fan motor
  • Works with Ventline Ventadome roof vent model V2094


diagram of placement of vent switch


BL0108-00 Ventline On/Off Rocker Switch for 1-Speed Fan, Light and 12V Roof Ventadomes






Customer Reviews

Replacement Mini-Rocker Switch for Ventline Ventadome Trailer Roof Vents - BL0108-00

Average Customer Rating:  4.9 out of 5 stars   (10 Customer Reviews)

Replaces a broken mini-rocker switch on your Ventline Ventadome RV roof vent for motor homes and enclosed trailers. Switch operates the fan motor.

- BL0108-00
by:

Couldn’t find this part anywhere else. We even had to exchange parts one time to get it just right!! Everyone was so helpful and very pleasant! These are the GO-TO guys for what you need. 661070



- BL0108-00
by:

Excellent factory switch. Our vent did not have a fan. This switch just snapped into the frame after the punch out was removed. 635702



- BL0108-00
by:

Called talked with someone at etrailer.com and they were able to find the correct switch that perfectly in my trailer. The whole ordering process was quick and painless. Also, the part arrived much sooner than I was told. 574650



- BL0108-00
by:

shipped the day I ordered. Arrived a day earlier and is exactly what I wanted for a great price. 471568



- BL0108-00
by:

Fast shipping. And good product 427466


Comments
It works well and is an exact replacement
Jim C - 08/31/2018

43026

- BL0108-00
by:

Perfect Fit! 364961



- BL0108-00
by:

The switch I ordered was a perfect fit along with the fan motor and fan blade . I couldn't be more pleased ! 341174



- BL0108-00
by:

Perfect fit. 333715



- BL0108-00
by:

Direct replacement for the original. 312495



- BL0108-00
by:

Easy to wire up and a good investment. 13846


10
10

Ask the Experts about this Ventline Accessories and Parts

  • Replacement Rocker Switch Compatibility with KIB Systems Monitor
    The Replacement Mini-Rocker Switch for Ventline Ventadome Trailer Roof Vents # BL0108-00 is a basic 10 amp switch allowing for a single function. It is designed to fit in a hole that is 3/4 inch by 1/2 inch. If that meets your criteria for your KIB Systems Monitor it should work just fine.
    view full answer...
  • Replacing Switch on Ventline Trailer Roof Vent
    Most likely the wires are soldered to the existing switch # BL0108-00 on your Ventline Roof Vent. To remove the wires you can either use a soldering iron like # PTW2000 on the wiring just enough that you can pull them free or if there is enough extra wiring you can simply cut them and reconnect them to the new switch after stripping the new ends.
    view full answer...
  • What Size Hole Does Ventline Switch part # BL0108-00 Fit
    The Ventline switch part # BL0108-00 that you referenced is designed to fit a rectangle hole that measures 3/4 inch by 1/2 inch. You'd want to measure the size of the hole that you currently have for switches to determine if this would fit.
    view full answer...
  • Replacement Switch for Ventline Roof Vent # V2094
    The correct replacement switch for your Ventline Ventadome Roof Vent V2094 would be the Replacement Rocker Switch # BL0108-00. This is a direct replacement for your old switch.
    view full answer...
  • Control Panel Switch Replacement for Aux Battery on 2006 Fleetwood Jamboree
    Assuming that the existing switch that controls the auxiliary battery on this control panel is a 10 amp switch that is 3/4" long x 1/2" wide, the Replacement Rocker Switch # BL0108-00 will work to replace your broken switch. If you have a switch with a different amp rating or size, please let me know what those specs are and I will work to find an alternate recommendation.
    view full answer...
  • Wiring Installtion of Dome Light and Brake Light on a 2015 Chevrolet Silverado 2500HD Truck Topper
    There are a couple of places you can get the correct circuit to use to wire up the third brake light and dome light for your camper shell. You can use the stoplight switch at the brake pedal of your 2015 Chevrolet Silverado 2500HD. You will need to use a circuit tester like our part # 40376 to probe the wires and find the one with voltage only when the brakes are applied. You can also consult the owners manual for the location of the CHMSL (center high mount stop light) fuse and tap...
    view full answer...
  • Fan Switch Knockout Dimension on Replacement Screen Frame for Ventline Ventadome Trailer Roof Vents
    I went out to our warehouse and measured the switch knockout on the Replacement Screen Frame with Screen # BVC0573-41 for you. The knockout is 3/4 inch by 1/2 inch as you assumed. If you want the switch integrated then use # BVC0573-41R in polar white or # BVC0573-31R in birch white. If you want the switch separately it is # BL0108-00.
    view full answer...
  • Adding a Battery to a Snowmobile Trailer for Interior Trailer Lights
    Start with mounting a battery. Since the trailer is enclosed, it would be a good idea to mount it on the trailer frame using a battery box like # 329-HM318BKS. Next, you will need to have the right kind of connectors on the truck and trailer. I would use a 7-Way RV style if you do not already have them on the truck and trailer. There is a 12 volt circuit on a 7-Way. You can run a wire from the 12 volt circuit on the trailer side connector to the positive battery terminal. The battery...
    view full answer...
  • Can Rocker Switch on Wall be Used to Install MaxxAir MaxxFan Deluxe # MA00-05301K
    Yes, you can do exactly what you mentioned. Have the MaxxAir MaxxFan Deluxe # MA00-05301K turned on all the time and then use a wall switch to complete the circuit. Basically you'd be using two switches on the same circuit and when both are on it will function like normal. We have rocker switches like the part # BL0108-00 which would work well.
    view full answer...
  • Installing a Battery on a Trailer and Wiring it to Run Interior Trailer Lights
    I recommend a 12 volt car battery rather than a breakaway battery because you may end up needing the larger battery down the road. What you will do is attach a battery box (see link for options) to the trailer frame. From the trailer side 7-Way connector, there will be a wire attached to the pin in the 11:00 position (if looking at the face of the plug). This is the 12 volt circuit. You can attach that to the positive terminal of the battery. It will maintain the battery but it will...
    view full answer...
  • How to Install a Ventline Ventadome Roof Vent with 12 Inch Fan Powered Lift
    You can utilize a power wall remote switch # VC0533-03-A or # VC0533-02-A (black or white). A rocker switch # BL0108-00 will work and you will need 2 of them. The installation kit # 344270KITW will come with screws, tape, and sealant. You will also need primary 16 gauge wire # DW02359-1 as well as a ceiling garnish # VA0445-35 I have attached a picture of wiring instructions for you as well. Installation Instructions for the Ventline Ventadome Roof Vent # V2119-601-00. 1.Mark...
    view full answer...
  • Adding a Trailer Battery to an Enclosed Cargo Trailer
    Start with mounting a battery. Since the trailer is enclosed, it would be a good idea to mount it on the trailer frame using a battery box like # 329-HM318BKS. Next, you will need to have the right kind of connectors on the truck and trailer. I would use a 7-Way RV style if you do not already have them on the truck and trailer. There is a 12 volt circuit on a 7-Way. You can run a wire from the 12 volt circuit on the trailer side connector to the positive battery terminal. The battery...
    view full answer...
  • Replacement Switch and Fan Blade for the Replacement 12-Volt DC Fan Motor
    The switch is not included with the replacement fan motor # BVD0218-00. You can use switch # BL0108-00. For a fan blade there are 2 options that fit the motor depending on the type you need. First we have the replacement fan for Ventline Ventadome vents, # BVD0215-00. And we have the replacement for Vanair vents, # BVD0217-00.
    view full answer...
  • Replacement Trailer Vent Fan, Motor, and Switch
    Motor # BVD0218-00 should be the correct replacement. The motor comes with new wires, a bracket, and hardware. The screws that hold the motor to its bracket can be accessed by removing the fan blade. It should just pull off of the motor shaft. You would have to also remove the screen. To remove the screen you may have to remove the ceiling garnish and frame from the inside. It appears you need fan blade # BVD0215-00. For a switch you can use # BL0108-00.
    view full answer...
  • Replacement RV Fan Motor Recommendation for Motor with MC385MG VD218 Written On It
    Motor # BVD0218-00 would be the correct replacement for what you have. The motor comes with new wires, a bracket, and hardware. If you needed the fan blade you would also want the part # BVD0215-00 and for the switch part # BL0108-00.
    view full answer...
  • How to Hardwire the MaxxFan Deluxe Roof Vent w/ 12V Fan Part # MA00-07500K
    In order to determine if the wires for a vent fan are already ran in your 2018 Flagstaff Ultralight 29RKWS, you would need to obtain the VIN and contact the trailer manufacturer as we would not have this information. However, if you do not already have pre-existing wires to attach the MaxxFan Deluxe Roof Vent w/ 12V Fan part # MA00-07500K to then this will not be a big deal as there are only two wires on the fan that need to be installed. This is the white wire for the ground and the...
    view full answer...
  • Replacement Switch for RV Oval Porch and Utility Light with Switch # RVPL7C
    We do have a switch that may work for you though it is not an exact replacement for the one on # RVPL7C. Take a look at the mini-rocker switch, # BL0108-00. This is a simple on/off switch like the one on the light.
    view full answer...
  • How to Power Interior Trailer Lights on a Trailer Not Powered by a Tow Vehicle
    First, you need to make sure that the lights you will be using are compatible with a 12 volt system because that is what a battery will produce. Since the trailer will not be connected to a tow vehicle for power, you can wire in the lights independently from a trailer connector. What you will need to do is mount the lights and route the wiring to a switch, like # BL0108-00 if you want them to come on at the same time. You will need to make sure to ground the lights to the trailer frame....
    view full answer...
  • Installing 3rd Brake Light And Dome Light For Leer Canopy On 2011 Ford F-350
    To install the 3rd brake light and the dome light on your Leer canopy to your 2011 F-350 you will need to do a couple things. First, there is a wire under the hood on the driver side that is blue and orange. You can tap into that for the brake light on your camper. You will need a circuit tester like part # 40376 to test the wire and make sure it only shows power when the brake pedal is pressed. To connect the dome light you can do that a couple different ways. The best way in my...
    view full answer...
  • Replacement Switch Recommendation for a Ventline V2094 Powered Vent Fan
    I spoke to my contact at Ventline and she said the correct replacement switch for your Ventline Ventadome Roof Vent part # V2094SP-28 would be the Replacement Mini-Rocker Switch # BL0108-00. The Replacement Fan Switch # BV0199-02 that you referenced is for the Ventadome roof vent part number V2128 and would not work for you.
    view full answer...
  • Does the Replacement Screen # BVC0573-31 Have a Knockout for Installing a Fan Switch
    As long as your existing vent is part # V2092, V2110, V2094 or V2119, the replacement screen you mentioned would work great for you. As you can see in the photo I edited for you, the screen frame does feature a knockout that can be removed so that the switch like part # BL0108-00 may be installed.
    view full answer...
  • Interior LED Light Recommendation for an Enclosed 5 x 12 Foot V-Nose Trailer
    I would say that you would need a minimum of 6 of the Thinline Sealed LED Utility Light, # UCL65CB, to light up the inside of your enclosed trailer. Another option would be the LED Domed Utility Light, # ILL24CB. Two or three of these should provide sufficient lighting for your trailer. You would also need to wire them together, and run them to a switch, like # BL0108-00.
    view full answer...
  • Wiring a 3rd Brake Light and Dome Light for Camper Shell in a 2010 Ford F-350
    I do know that on a 2011 F-350, and probably the same for 2010, there is a wire under the hood on the driver side (blue/orange) that you can tap into to power a brake light on the camper shell. Take a look at the helpful link I have included that will take you to a question and answer page showing the wire. Use a circuit tester like # 40376 to test the wire to make sure it lights up only when the brake pedal is pressed. You can also consult the owners manual for the location of the...
    view full answer...
  • Can 12 Volt Circuit on a 2012 GMC Yukon 7-Way be Used to Power Two 55-Watt Halogen Utility Lights
    The amperage draw of 2 of the 55-Watt Halogen Flood Beam Lights, # QH16CTS, is 9 amps. This should not be a problem for a 12 volt circuit on a 7-Pole. You can check the owners manual and/or the legend on the lid of the power distribution box for the fuse that powers the 12 volt circuit to see what it is rated for to be sure. The amperage rating for a factory 7-Way might also be listed in the vehicle owners manual. If connected to the 12 volt circuit from a trailer connector, the lights...
    view full answer...
  • Does the LED Domed Utility/Multipurpose Light # ILL24CB Have a Switch
    The LED Domed Utility/Multipurpose Light, # ILL24CB, does not have a built-in on/off switch. You could wire a switch in-line with the dome lights wiring using # BL0108-00. Or you can use an incandescent light that has a built-in switch like # 390S.
    view full answer...
  • Recommendations for a Trailer Mounted Utility Light for Night Boat Docking
    With a clear lens and 42 diodes, light # BUL90CB, would be plenty bright for your application. If you wired it into the running light circuit, you would just have to have the truck running lights on to power the light and not have to install a switch. Of course this would mean the light would be on all the time with the truck running lights. The electrical components in the light are sealed. The gasket offers further protection from the elements and would work well for your application. A...
    view full answer...
  • How Does the LED RV Interior Light # ILL31CB Turn On and Off
    The LED RV Interior Light, # ILL31CB, would have to be wired to a switch to turn off an on. If the old lights were wired to a separate switch, like on the wall, this light would wire in the same way. If you needed a switch, you could use something like # BL0108-00. Power from the trailer would go in to a terminal on the switch and the power wire to the light would also connect to the switch.
    view full answer...
  • Will Optronics Trailer Light # ST90RB Light Up if Connected Directly to a 12 Volt Battery
    I can honestly say I have never had someone building a railroad crossbuck sign ask me a question! But, yes, the Optronics light # ST90RB will illuminate steady when connected to a 12 volt power source, like a battery, provided that the power source has a charge (if the battery runs low the light can dim). An LED light, like # STL90RB, will be brighter and use less power. It would not look as authentic, but it will consume less power and last longer. To be able to turn the light off...
    view full answer...
  • Can Hopkins Backup Sensor System # HM60100VA Be Mounted in Front on Kia Optima and Run Off a Switch
    The way the Hopkins Backup Sensor System, # HM60100VA, works as that when there is power applied to it, the sensors will begin trying to sense any obstructions. This ideal for the rear of the vehicle because it is meant to be attached to the reverse light circuit. You could wire it into a 12 volt ignition source (power that is only active with the vehicle running) and have it on a switch like # BL0108-00. You would need to wire the power wire from the systems to the switch and then...
    view full answer...

Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Written by:
Raymond P
Expert Research:
Jameson C
Expert Research:
Sarah H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.