Troubleshooting Accessory Not Fitting with Kuat Hi-Lo Hitch Extender
Updated 06/04/2025 | Published 05/24/2025
Question:
My Kuat Hi-Lo Hitch Extender would not allow me to insert the hitch pin. When I peered through the hole, there was a metal obstruction. After coming across this problem I thought maybe if I backed off of the the flat lock using the supplied wrench it would clear the obstruction. However after doing so the steel ball used within the flat lock system fell off and couldnt be reinstalled. With that said even after backing off the flat lock the obstruction never cleared for me to be able to insert the hitch pin. Afterwards I surmised that the hitch extender was faulty because the hitch pin hole would not allow the pin to run completely through it and lock the pin in place so I returned it. With that said, I was quite surprised to find that if the flat lock system would allow the user to back off the anti-rattle/wobble flat lock system to a point where the innards come loose which makes it unusable.
asked by: Dana W
Expert Reply:
Hey Dana, thanks for reaching out, although I'm sorry to hear about the problems you're having.
What accessory were you trying to install into the Kuat Hi-Lo Hitch Extender # HL20B, and do you have any photos of the obstruction you mentioned?
I'm not seeing that you purchased the Hi-Lo directly from etrailer directly, so did you purchase it from somewhere else and they tried to help you out?
Product Page this Question was Asked From
Kuat Hi-Lo Hitch Extender - 2" Hitches - 7" or 10" Extension - 2-1/8" Rise/Drop
- Accessories and Parts
- Hitch Bike Rack
- Shanks and Adapters
- Hitch Extension
- NV 2.0
- Sherpa
- Transfer
- Kuat
more information >
Continue Researching
- Video: A Closer Look at the Kuat Transfer V2 Bike Rack Replacement Front Wheel Cradle
- Q&A: Trouble Getting Hitch Pin Holes To Line Up Using Kuat Shank Adapter # D101
- Shop: Master Lock Hitch Receiver and Coupler Latch Lock Set - Padlock - 1-1/4" and 2" Hitches
- Shop: Anti-Rattle Hitch Lock for Kuat Transfer Bike Racks - 1-1/4" and 2" Hitches
- Shop: Kuat Pivot XD Heavy Duty Swing Away Hitch Extender for Bike Racks - 2" Hitches - Passenger Side
- Shop: Replacement Front Wheel Cradle for Kuat Transfer V2 Bike Racks
- Shop: Kuat Bike Rack Shank Adapter - 1-1/4" to 2"
- Shop: Hitch Lock for Kuat Bike Racks - 1-1/4" Hitches
- Video: All You Need to Know About the Anti-Rattle Hitch Lock for Kuat Transfer Bike Racks
- Q&A: Which Swing Away for Bike Racks Would You Say is Beefier in Design the Kuat or Swagman?
- Shop: Kuat Hi-Lo Hitch Extender - 2" Hitches - 7" or 10" Extension - 2-1/8" Rise/Drop
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
- Video: How to Choose a Trailer Brake Controller
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Search Results: trailer tires and wheels
- Search Results: trailer jack
- Shop: Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Q&A: Does etrailer Carry Furrion Chill Cube w/ Heat Pump to Replace Dometic Duo-Therm
on Accessories and Parts
Dana W.
6/4/2025
Did not purchase from you guys. Just needed question answered is all. I was trying to install the onto my LR Defender to use with my Kuat Pro-X bike rack. As explained the hole for the hitch pin had obstruction preventing the locking pin from fully inserting. Afterwards, when I tried to clear the obstruction by loosening the flat lock system on the Hi-Lo extender, the whole inside appeared to fall apart leaving the Hi-Lo useless. I had to return to purchaser for replacement. The replacement worked fine. The problem I have with the extender is that it allowed for me to loosen the flat lock system until the inside fell apart leaving it useless. There should be a stopping point with at least a form of resistance before you get beyond the point where the working of the Hi-Lo extender fall apart.