Is Furrion Vision S+ Direct Replacement for Vision S

Question

Question:

Would the S+ system be a direct replacement for an existing S system?

asked by: Bill

0

Expert Reply:

Hey Bill, yes the Furrion Vision S+ # FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though.

expert reply by: Jameson C

0

Furrion S.

6/15/2025

If you need to replace a furrion sharkfin camera can you use a furrion S+ camera instead?

Jameson C.

6/16/2025

@FurrionS With a standard Vision S? No you can't.

Tina

6/22/2025

@JamesonC I currently have a Furrion Vision S camera system on my fifth wheel. If I wanted to replace it with furrion vison S+ system can I remove all the cameras and replace with all the S+ or is the wiring different. My 2020 grand Design Momentum came with it prewired and the furrion S system

Jameson C.

6/23/2025

@Tina All of the wiring is the same so the connectors and everything would be the same which means a simple install.

Peter

10/20/2025

Our 2022 Pinnacle 32RLTS came equipped with the Furrion Vision S rear and side cameras pre-installed. I understand that the new Vision S+ isn't backwards compatible but will the cameras mount to the existing mounts without having to disturb any of the caulking of the mounts already on the RV?

Jameson C.

10/21/2025

@Peter The mounts and brackets for the Furrion Vision S and the S+ is the exact same so the kit part # FR64AD would work in place of what you have without causing any issues with the mounts like you asked about.

Michael E.

3/12/2026

Yes, I just changed mine out. The only thing is if you have a GMC truck 2023 and newer you will need a furious 7 pin power plug adapter.

Jameson C.

3/12/2026

@MichaelE Good call! Yeah in that case you'd also want the part # FR87PR.

Answer 1

Hey Jason, thanks for reaching out. At this time Furrion does not offer an upgraded or extended-range antenna for the Vision S+ camera system #FR74AD. The only antenna available is the standard one that comes with the system, and there is not…

view full answer...

Answer 2

Hey Christie! Yes, the Furrion Vision S+ Wireless RV Observation System w/ 3 Cameras #FR64AD will fit that mount on your camper. You're prepped for Furrion, and that mount works for both the Vision S and Vision S+. Since the S+ is the newer…

view full answer...

Answer 3

Hey David. We have two options to replace a Furrion backup camera and which one you need will depend on what system you currently have. The Furrion Vision S+ Wireless RV Backup Camera item #FR24AD only works with the Vision S+ systems. The Furrion…

view full answer...

Answer 4

Hey Robert, I would check to see if something happened to the antenna on the camera if this is a new problem. It's possible it's not pointing up anymore and fixing that will get you back the reception you once had. Let me know if that helps…

view full answer...

Answer 5

Hey Matt! The Furrion Vision S+ Wireless RV Backup System w/ 1 Camera #FR57AD supports up to 4 cameras so you can add your existing #FR24AD and even the side marker cameras #FR84AD if you want to. What kind of trailer are you adding your cameras to?

view full answer...

Answer 6

Hey Scotty, so unfortunately Furrion recently discontinued the Vision S system and replaced it with the Vision S + which uses all new components and is not backwards compatible. What that means is that we don't have a replacement camera alone for…

view full answer...

Answer 7

The biggest issue we see with the Furrion Vision S Wireless RV Backup Camera Systems like part #FOS43TASF comes from the wiring on the vehicle side, the running light circuit in particular. If it's less than 12 volts then the camera won't be…

view full answer...

Answer 8

*Updated From Below Hi Michael; I'm sure you're right, it is probably prepped for the Furrion. Since Furrion is phasing out the old Vision S, and parts won't be available soon, you want to get the new Furrion Vision S+ Wireless RV Backup…

view full answer...

Answer 9

Hey, Brian. From your message, it sounds like you already have brackets for the Furrion side marker lights with the built-in camera. If you’re only needing the side marker lights themselves, Furrion does offer those separately as part #FCE48TASL. If…

view full answer...

Answer 10

Hello Ken, thanks for reaching out. Sadly, the Furrion Vision S camera system is being discontinued and replaced with the Vision S+. The camera for the Vision S+ is not backwards compatible with the Vision S system, so sadly if your camera is bad,…

view full answer...

Answer 11

Hey Alfredo! Great question. The Furrion Vision S+ Wireless RV Observation System #FR57AD, #FR74AD, and #FR64AD are all capable of recording. The 7" monitor has a micro-SD card slot (must be at least Class 10) and supports cards up to 128GB.…

view full answer...

Answer 12

Hey Clarence! That would be great but none of the trailer camera systems are going to pair with vehicle monitors/screens. All of them will require a separate monitor. The Furrion is a really nice system so I do recommend it. Since the Vision S is…

view full answer...

Is Furrion Vision S+ Direct Replacement for Vision S

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching