How to Find Replacement for 4 Lug Hubs on Utility Trailer
Updated 12/15/2025 | Published 11/18/2024
Products Featured in This Question
Question:
I am in need of 2 new, 4 lug hubs for my small utility trailer. I have one of the two hubs as the other broke and was discarded. Is there any way I could mail it to you and you could match it up with replacements?
asked by: David W
Expert Reply:
Hi David; we don't have a way for you to mail it to us so you will have to identify the hub to find the right replacement. Identifying the hub is pretty easy and will save you money since you won't have to pay to ship a hub. Based on the bolt pattern, I'm sure you have a straight spindle that uses either # L44649 inner and outer or # L44643 inner and outer bearings.
Take a look at your bearings to see if they have part numbers stamped in the side. If not, you can measure the inner diameter of the bearings or the spindle where the bearings ride using a digital caliper # PTW80157. If you find that you have # L44643 bearings with a 1.00" ID you can use the # CE13100 you were looking at. If you have # L44649 bearings with a 1.063" ID you can use the # CE13109 instead.
(click to enlarge)
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2500 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer bearings races seals caps
- Search Results: trailer hubs and drums
- Search Results: l44643
- Q&A: Availability Of Hub For Short Spindle
- Search Results: wheel bearing seal
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Video: Feature Review CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles
- Video: All About the Trailer Idler Hub Assembly for 2,000-lb Axles
- Q&A: Spindle Compatible With Trailer Idler Hub Assembly AKIHUB-440-2-1K
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearing Kit - BK1-150
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Shop: Timken Replacement Trailer Wheel Bearing - L44643
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Dexter Bearing Kit for 4.4K Axles - Inner and Outer Bearings LM67048/L68149
- Video: In-Depth Review of the Replacement Race for L44643 and L44649 Bearings
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Shop: Replacement Grease Cap for Dexter/Tie Down Engineering Vortex Trailer Hubs
- Search Results: trailer tires and wheels
- Q&A: Parts Needed To Add Electric Drum Brakes To 1994 Jayco Pop-Up
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Replacement Hub Recommendation for Trailer with .99 inch Bearing ID Surface Dimension
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Most Popular Wheel Bearings
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Lighting Requirements
Robin H.
12/15/2025
Hey David, were you able to check the bearing numbers or measure the spindle on your trailer hub? Knowing which size matched up would be really helpful for others trying to replace a similar hub. Your update could make it easier for the next person with the same issue.