Recommended Weight Distribution Hitch for 2024 Airstream Flying Cloud 30FB Office
Products Featured in This Question
Question:
Looking for WDH/Sway control for rig: 2019 Ram 2500 4x4 diesel crew cab short bed, Air Lift 5000 air bags, AirSafe VI Hitch no chank needed, 2024 Airstream Flying Cloud Office
asked by: Eric G
Expert Reply:
Hi Eric; based on the specs of your trailer I recommend the Equal-i-zer Weight Distribution w/ 4-Point Sway Control # EQ37121ET. It looks like the Office is the 30FB with an unloaded tongue weight of 900 lbs. Based on that and the GVWR of 8,800 lbs you will likely end up just under 1,200 lbs of tongue weight fully loaded. However, I recommend measuring with a scale like the # e99044 just to be sure.
The Equal-i-zer # EQ37121ET has a tongue weight range of 800-1,200 lbs so it will have you covered no matter what. This also does not come with a shank since you already have one. The Equal-i-zer WDH is a high quality system that is largely considered to be the best and is one of my favorites.
Product Page this Question was Asked From
Reese Strait-Line Weight Distribution w/ Sway Control - No Shank - 12 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Shank Not Included
- Top-Mount
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Video: A Closer Look at the etrailer Tongue Weight Scale for Campers and Utility Trailers
- Shop: TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2"
- Shop: TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 28" Long
- Shop: etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity
- Q&A: Can Weight Distribution System Be Used on Aluminum Trailer Frame
- Search Results: superhitch
- Search Results: superhitch magnum
- Shop: Suspension Enhancement
- Q&A: Hitch For 2001 Ford F-250 Super Duty to Add 30 Inch Hitch Extender
- Shop: Thin Walled Socket for Equal-i-zer Hitches
- Search Results: hitch and ball
- Search Results: hitch extension
- Shop: TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 24" Long
- Shop: Reese Pole-Tongue Adapter for Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW
- Shop: RV Refrigerator Roof Vent Cap and Base - 23-3/4" x 6-3/4" Cutout - Black
- Video: Review of Weigh Safe 180 Hitch 2 Stainless Steel Ball Mount 2 Inch Shank - WS42RR
- Q&A: When Do You Measure The Trailer Tongue Weight For Setting Up Weight Distribution On Imagine 3100RD?
- Search Results: 1 7 8 thin walled socket
- Search Results: e88yr
- Q&A: Replacement Camper Jack System For An Older HappiJac 4150 System
- Video: Feature Review etrailer Tongue Weight Scale for Campers and Utility Trailers
- Search Results: super hitch extension
- Q&A: Will a Longer Weight Distribution System Shank Work with B&W Continuum Weight Distribution System
- Q&A: How Low Does The B&W Continuum Weight Distribution System Hang Below The Trailer?
- Q&A: Recommended Weight Distribution Hitch That Allows For Backing Up
- Video: Finding the Right Trailer Wiring Harness
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
on Weight Distribution Hitch
Eric G.
8/1/2024
Thanks Robin - great information.