Result: super hitch extension

The shortest tire we carry that is designed to fit a 16 inch rim would be the size 235-80R16 that is 30.9 inches in diameter. For that you would want the part #AM10248. I attached a review video for this tire for you to check out as well.

Based on your picture the linkage from the frame to the sway bar would be in the way for Curt trailer hitch #C15409. But not to worry because there is a hitch that accounts for a Hellwig sway bar for a 2003 Dodge Ram 2500 with factory hitch. It is…

For your 2018 Ram 3500 dually long bed we have the Torklift hitch part #TLD1108 that is a confirmed fit and would work great.

According to HappiJac You can replace the Front Anchor Plates for HappiJac in the kit that came off the 2008 Dodge 3500 with the front anchor plates part #LC182871. You can re-use the rear anchors, guide plates and L-brackets. You will need to…

The difference is the part #TLD3113 fits the 2020 Ram 2500 and the part #TLD3112 fits the 3500 models. They are not interchangeable. Since you have a 2500 model you would want the TLD3113.

For HappiJac Camper Tie Downs for your 2021 Ram 2500 8' bed we have part #LC236326-205221. This comes with both the front and rear tie downs.

The only other extension that will meet your 36" requirement is the Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long #RP45018. This extension would have a maximum gross trailer weight of 7,500 lbs/750 lbs of…

The Torklift Hitch Extension part #TLE1636 that you referenced can tow a trailer that weighs 6,700 lbs like you what you have but you would need to use a weight distribution system with it to have the needed capacity as without a WD system it's…

Thanks for the picture! The Replacement Converter Section item #PD4045CSV is the correct part you need to replace your PD4045KA converter. It is compatible with Lithium batteries you'll just have to flip the LI/LA switch. I linked the…

For starters, the TorkLift Cannon Hitch Extension part #TLE1636 that you referenced is only designed for a 2016+ Ford Super Duty with the 3" receiver tube. According to my research, the 2015 Ford Super Duty only comes with a 2-1/2" receiver…

There are 2 different capacities independent of each other though related. Tongue weight is the downward force or weight on the trailer hitch. So it is pushing down at the back of the vehicle. The gross trailer weight is the weight of whatever it is…

Since your factory hitch is bolted on and not welded on the correct Torklift hitch is the #TLD1102 and not the part.