Is Correct Track Trailer Alignment and Lift Kit Compatible With MORryde Suspension Upgrade Kit
Updated 03/28/2024 | Published 03/09/2024
Products Featured in This Question
Question:
Are the moryde style wet bolts long enough to use with the correct track lift kit?
asked by: Kevin
Expert Reply:
If you install the Correct Track Trailer Alignment and Lift Kit # RR23QX it will require longer bolts but MORryde makes a kit specifically for this. To find the right MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track you will need the center to center bolt hole measurement from your current shackle straps.
If you have 2-1/4" shackles you need the MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track # MR58ZR. If you have 3-1/8" you need the # MR98ZR instead. You will also need two additional # MR52HR. The kit was originally made for a different version of the Correct Track and MORryde hasn't updated it yet. The two 2-7/8" long bolts need to be replaced with these 3-3/8" long bolts. If you already have the regular kit you can just swap out your 2-7/8" bolts for the # MR52HR.
Product Page this Question was Asked From
Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- RV Ride Control
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: trailer suspension parts
- Search Results: morryde trailer suspension parts
- Video: Turn Rough Roads Into Smooth Rides – MORryde Shows Off Their Suspension Upgrades
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Search Results: trailer leaf springs
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 3-1/8" Shackle Straps
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: Replacement Wet Shoulder Bolt - MORryde Suspension Upgrade Kits - 9/16" x 3-3/8" - Qty 1
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps
- Search Results: 7k leaf springs
- Search Results: 1~3/4 inch wide trailer leaf springs
- Search Results: spring hangers
- Search Results: leaf spring hangers
- Q&A: Replacement Rubber Shear Spring for MORryde on 2010 Jayco Designer 35RLTS
- Shop: MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" Long Shackle Straps
- Q&A: Recommended Double-Eye Leaf Spring for 8,000 lbs Axles
- Q&A: Is Higher Numerical MORryde Shear Pins Mean Stiffer Springs
- Video: etrailer And Dexter 7-Leaf Double-Eye Spring Comparison
- Video: Review of Andersen 5th Wheel Gooseneck Adapter - AN27VR
- Q&A: Replacement 26" Leaf Spring Recommendation for 6K Axles on a 2017 Jayco Eagle
- Video: MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation - 2018 Shasta Phoenix Fifth Wheel
- Video: Review of MORryde Trailer Leaf Spring Suspension - Spring Mounting Hardware - MR78ZR
- Q&A: Will Adding Heavy Duty Springs Lift My Trailer?
- Q&A: How to Find Replacement Leaf Springs for 2024 Alliance Paradigm 385FL
- Video: MORryde X-Factor Crossmember for Standard Frame Hangers Feature Review
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
- Shop: Suspension Enhancement
- Q&A: Recommended Lift Kit for a Grand Design Reflection 150 Model 270BN
- Shop: Towing Mirrors
Kevin
3/20/2024
How safe is the correct track trailer alignment and lift kit #RR23QX? It seems like it would put excessive stress on the welds on the spring mounting brackets/hangers, especially under periods of hard braking or under side loads during sharp turns at driving speed.