Replacement Disc Brakes For a DHM Boat Trailer With 2,860LB Axle Rating and 14" Diameter Wheels
Updated 08/15/2023 | Published 08/14/2023
Products Featured in This Question
Question:
I have 2001 MB Sports with a DHM trailer. The brakes are in need of replacement. The tag on the trailer says GVWR 5720 and 2860 GVWR per axle. The wheels are 14x6. They are disc brakes on the front axle. Do you have the brakes needed for this trailer? Thanks.
asked by: Matt
Expert Reply:
Based on the information you provided you most likely have a 10" disc brake kit like the Kodiak # KOD59FR. The only way to verify exactly what you have or will need to replace them is by contacting the trailer manufacturer with your VIN information or by disassembling one of your hubs to measure and verify the correct parts and sizes. This Kodiak attaches to a Mounting Flange # 4-35 with the bolt holes spread 2-7/8" vertically and horizontally. You will also need to check the spindle. The Grease Seal # 58846 (1.719" inner diameter), Inner Bearing # L68149 (1.378" inner diameter) and Outer Bearing # L44649 (1.063" inner diameter). The hub has a 5 on 4-1/2" bolt pattern. If this matches what you have you will need the Mounting Bolts # BRKH10A to attach the new caliper brackets.
(click to enlarge)
Product Page this Question was Asked From
Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet/KodaGuard - 3,500 lbs - E-Z Lube
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Hub and Rotor
- 1/2 Inch Studs
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Kodiak Disc Brake Caliper - Dacromet - 3,500 lbs to 6,000 lbs
- Search Results: brake hoses
- Search Results: kdbc225dac
- Shop: Kodiak Hydraulic Brake Hose - 3/16" Male Fittings w/ Stainless Flares - 1/8" ID - 1.5'
- Shop: Kodiak XL ProLube Oil Bath Hub Body and Cap - 1.98"
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet/KodaGuard - 3,500 lbs - E-Z Lube
- Shop: Demco Hydraulic Brake Hose with Fittings - 19" Long
- Video: Review of the Replacement Mounting Bracket for Kodiak Disc Brake Caliper
- Video: Kodiak Disc Brakes Spec Review
- Video: Kodiak Disc Brake Caliper Review
- Q&A: Replacement Oil Seal and Oil Cap for Reliable Oil Hubs on 2004 Mastercraft Trailer
- Q&A: Will Dexter 8-248 Dexter Hub Replace Reliable R1001 Hub
- Q&A: Replacement Grease Seal for a 168255TC Rubber Coated Seal
- Search Results: 168255tc
- Video: Feature Review Kodiak Disc Brakes
- Shop: Kodiak Hydraulic Brake Hose - Straight and 90-Degree Male Fittings w/ Stainless Flares - 1.5'
- Q&A: Replacement 250-031468 Seals Needed for Reliable Oil Bath
- Video: Bleeding Brakes Demonstration
- Q&A: Bleeding Trailer Brakes After Installing Kodiak 225 Disc Brake Calipers
- Video: Hands-On with the Kodiak Disc Brake Kit
- Video: Detailed Breakdown of the Shackle Bolt with Locknut For Double-Eye Springs
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Q&A: Removing and Replacing Trailer Spindles
- Q&A: Is The CE Smith Idler Hub Compatible With DeeMax Slip On Disc Brake Rotor For 3,500LB Axle?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer hitch
- Search Results: trailer wiring
on Trailer Brakes
