How to Remove Lower Cover of Lippert Powered Trailer Jack LC285318

Question

Question:

How do I remove the lower cover for a loppers 3500 jack

asked by: Brian

1

Helpful Expert Reply:

The Bottom Jack Cover # LC23UD of the Lippert jack # LC285318 has four screws in it that hold the top to it. You'll need to remove those screws first and take the top # LC285160 off. Once the top is off you can then dismantle the bottom cover from the jack and slide it off.

expert reply by: Jameson C

1

Answer 1

There are 4 screws on the bottom of the bottom cover holding it to the top. And if you remove the cap on the very top of jack #LC285318 you will see 2 more screws. With all the screws removed you should have no problem with the cover. These very…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The Bottom Jack Cover #LC23UD has four screws in it that hold the top to it. You'll need to remove those screws first and take the top #LC285160 off. Once the top is off you can then dismantle the bottom cover from the jack and slide it off. Once…

view full answer...

Answer 4

When it comes to checking your retract/extend functions not working it sounds like you may just need to swap some wiring on the back. I will attach picture of the wire swaps. It sounds funny but per the manfuacturer that does seem to help. If that…

view full answer...

Answer 5

Yes, I confirmed with Lippert that the Replacement Top Cover for Lippert Components Electric Trailer Jack part #LC285160 will fit your Lippert 3,500 Lb Electric tongue Jack 1817941.

view full answer...

Answer 6

According to the Lippert Service Manual for the Lippert Electric Trailer Jack #LC285318. "Maintenance 1. Before each use, inspect the Power Tongue Jack and replace if bent or damaged. 2. If wiring is connected to battery terminal, inspect at…

view full answer...

Answer 7

If the touch pad is showing "Retract Time out Return Levelers for service" all you need to do is hit, enter and retract at the same time. That will clear that code. I confirmed this with our contacts at Lippert.

view full answer...

Answer 8

We do indeed offer a replacement upper and lower housing for the Lippert #LC285318 Electric Trailer Jack. The upper housing is part #LC285160, the lower housing is part #LC23UD which also includes the lamp lens.

view full answer...

Answer 9

Hey Amie, for the Lippert electric trailer jack part #LC285318 if you need replacement switches you'll need the replacement top cover #LC285160 as just the light switch is not available.

view full answer...

Answer 10

To replace the extend/retract switch on your Lippert 181794 Electric Trailer Jack you'll simply need the Replacement Extend/Retract Switch for Lippert Electric Trailer Jack #LC49MD. If you're needing to replace the on/off or just both…

view full answer...

Answer 11

I would be happy to help! The replacement extend/retract switch for your Lippert Power Jack #LC285318 is not available by itself, so you will need the Replacement Top Cover for Lippert Electric Trailer Jack - Black #LC285160 which includes the new…

view full answer...

Answer 12

Since you damaged the light switch and housing of your Lippert RV jack part #LC285318 what you'd want is the Replacement Top Cover with Switches #LC285160 and you'd have everything replaced that was damaged.

view full answer...

How to Remove Lower Cover of Lippert Powered Trailer Jack LC285318

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching