Identifying Capacity and Replacement Parts for UFP Axle
Updated 02/25/2025 | Published 03/05/2023
Products Featured in This Question
Question:
I have a UFP axle serial #A855575. Can you tell me what the rating is and if you have parts for it? Thanks
asked by: Rick B
Expert Reply:
According to Dexter, this is a 3,750 lb torsion axle with a 90.3" hub face measurement. More than likely your axle uses # L68149 and # L44649 bearings with a # 168255TB grease seal. You will need to verify this information since Dexter did not have it available. Assuming that is correct, we have the following parts available depending on what you need:
-Trailer Idler Hub Assembly # AKIHUB-545-35-K
-Trailer Hub and Drum Assembly # AKHD-550-35-K
-Electric Trailer Brake Kit # AKEBRK-35-SA
-Dexter Disc Brake Assembly # T10HREKITBB
I'm not sure if you don't have brakes, have electric drum brakes, or disc brakes so I included replacements for all possibilities. If you were looking for different replacement parts please let me know and I will see what we have available.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: eq37120et
- Search Results: eq70~00~4800
- Search Results: eq90~02~4700
- Search Results: deemaxx
- Shop: Trailer Hitch
- Search Results: trailer hitch wiring
- Search Results: trailer wiring
- Shop: Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Search Results: electric jack
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Demco eZ-Latch Gooseneck Coupler - Square Inner Tube - 2-5/16" Ball - 30K GTW
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Q&A: Why Are The Erickson Ratchet Straps EM98CV Falling Off My Tires
- Video: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control Review
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2024 Honda Pilot
- Video: Don't Forget the Brake Lines | Tips from the Manufacturer
- Q&A: Replacement Disc Brake Parts for a 2023 Continental Dual Axle Boat Trailer
- Video: Neighbor Interaction with the DeeMaxx Disc Brake Kit
- Q&A: Bearings and Grease Seal Recommendation for Titan Premier Disc Brake Kit # T2HRCM10DAC
- Video: Installation of the DeeMaxx Disc Brake Kit
- Video: Ultimate Overview of the Paneloc Slam Latch
- Q&A: Disc Brake Kit Recommendation for 3,500 lb Axle and 5 on 4-1/2" Bolt Pattern Idler Hub
- Video: All You Need to Know About the Double Lip Seal for 3,700-lb Marine Hubs
- Q&A: Converting Hubs From Grease To Oil Bath On 2014 Outback 298RE Travel Trailer
- Q&A: Replacement Oil Bath Hub Body and Cap for a UFP Oil Bath Hub w/ a 1.98 Hub Bore
- Q&A: Replacement Axle for 1969 Aristocrat Trailer With 4" Drop Spindle and Electric Brakes
- Shop: Wheel Cover
James M.
2/20/2025
I have a ufp a232700 axle and needed to know if you could tell me the specs thanks