Replacement Axle System For a Yacht Club Snowmobile Trailer With 5 on 4-1/2" Bolt Pattern.
Question:
I need help ordering the correct torsion axle for my Yacht Club snowmobile trailer. Hub face to hub face is 70”1/4 Center hole to center hole is 54” Outside to outside frame is 56”1/4 5 lug 4”1/2
asked by: Brett D
Expert Reply:
I have an option for you as we do not carry torsion axles. The Timbren Axle-Less Trailer Suspension System # ASR1THDS02 will bolt to your frame rails and includes the suspension along with a spindle. To this spindle you will be able to add 2 of the Easy Grease Trailer Idler Hub Assemblies # AKIHUB-545-35-EZ-K to have your 5 on 4-1/2" bolt pattern. Do note that these hubs will stick out 8-1/2" from your frame to the hub face and your current hubs are only 7" on each side. The suspension on the Timbren is rated for up to 2,200lbs and uses a stronger 3,500lb spindle to ensure long life for the spindle and bearings.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 4 Bolt Flange - 2.2K
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- No Hubs
- 2200 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Suspension Enhancement
- Shop: 4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles - 30" Long
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Shop: 3-Leaf Slipper Spring w/ Flat End for 2,900-lb Trailer Axles - 30" Long
- Shop: Replacement U-Bolt for 2" Wide, Square Axles - 1/2" Diameter - Zinc Plated
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Video: A Closer Look at the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs
- Q&A: Recommended Rear Suspension Enhancement For a 2023 Chevy Silverado 2500HD Crew Cab Short Bed
- Shop: Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle
- Shop: Air Lift LoadLifter 7500 XL Air Helper Springs - Rear Axle
- Video: Checking Out the 12-Volt USB Charger
- Search Results: trailer leaf springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Trailer Hitch
- Video: Choosing the Right Vehicle Suspension Upgrades
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Search Results: trailer suspension parts
- Shop: Trailer Wiring
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Shop: RV Bearing
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Q&A: How to Choose Correct Replacement Leaf Springs and Equalizers for a 2021 Coachmen 259FKDS
- Search Results: suspension enhancement
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer hitch
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Video: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Brake Controller
on Trailer Suspension Parts
