Trailer Hitch and 7-Way Wiring Connector Installation on a 2004 Jeep Grand Cherokee
Question:
hi I have a 04 jeep grand Cherokee Laredo 6cyclinder. I am looking to do a hitch with the 7 round connector and also a trailer brake so I am able to tow my camper. I see there are many kits available and real easy to install with the 4 flat connector but could u help me put a package together with a hitch class 3 and all the correct wiring and a brake controller. that way I can have the 7 round connector and a electric brake that will all work for my jeep. it does not have factory towing. if u could help me get everything I need to complete this job would be much appreciated. would like to order asap but do not want to order the wrong stuff as I see there is many different things available. thanks,
asked by: Josh R
Expert Reply:
The hitch that you referenced the Curt # 13051, is indeed a class III hitch that is confirmed as a fit for your 2004 Jeep Grand Cherokee. I have included a video of this installation for your reference.
Since your Cherokee does not have any existing wiring harness you are again correct that there are several plug in applications that will establish a 4-way trailer wiring harness for your vehicle. To install a fully functional 7-way connector for your Jeep you will have to start by establishing a 4-way trailer wiring harness.
For your Cherokee, I recommend using the Curt Custom fit vehicle wiring harness # C55369. This connector plugs directly into your existing vehicle wiring harness in the cargo area of your vehicle. This wiring harness includes a tail light converter that will convert your Jeep wiring to be compatible with your trailer wiring configuration. Additionally this wiring harness includes a fuse that is installed in-line with the converter.
I suggest to see if you can route the 4-way vehicle connection under the vehicle. You might be able to access this though the spare tire access area, or through other areas in the cargo compartment. Please make sure the while routing the wire the wiring insulation will not be be in a location that would compromise the insulation of the wiring. It you will be using an existing access hole please make sure that a grommet like the # A11GB, or some wire loom like the # 459075-1 is used to protect the wiring insulation.
Once you have established the 4-way on your 2004 Jeep Grand Cherokee, you can then use the # ETBC7 to establish a 7-way vehicle wiring connection. I have included a helpful article that walks you through the steps for installing the # ETBC7 to establish a brake signal at the vehicle connection point.The vehicle connection on the # ETBC7 will be a 7-way blade style of connection.
For a brake controller for your Jeep Grand Cherokee I recommend the Tekonsha Prodigy P2 # 90885. This is a proportional brake controller that includes a continuous diagnostic display. It is also highly adjustable depending on your towing needs and preferences.
I have included links to the parts referenced above, several helpful articles and several videos of your reference.
Products Referenced in This Question
Wire Loom, 1/2" Diameter (per Foot)
- Wiring
- Wiring Protection
- Wire Loom
- 1/2 Inch Diameter
- Spectro
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Splice-In
- Under-Dash Box
- Under-Dash
- Up to 4 Axles
- LED Display
- Single Trailer Only
- Tekonsha
more information >
Replacement Flush Mount Rubber Grommet - 3/4" Diameter - Qty 1
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- Grommet
- 11/16 Inch Diameter
- Round
- Optronics
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Hidden
- CURT
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C55369 Review
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Troubleshooting 7-way Trailer Connector on 2004 Jeep Grand Cherokee
- Shop: Adapter 4-Pole to 7-Pole and 4-Pole
- Shop: Hopkins Endurance Quick-Install 7-Way Trailer Connector
- Search Results: 7 way rv
- Shop: Demco 4-Diode Universal Tail Light Wiring Kit for Towed Vehicles - 7-Way to 6-Way Adapter Cord
- Shop: Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes - Proportional
- Shop: Towed Vehicle Battery Charge Line Kit for Demco Air Force One and Stay-IN-Play Duo Braking Systems
- Search Results: 8 gauge wire
- Q&A: Trailer Wiring Harness Recommendation for a 2004 Jeep Grand Cherokee without Tow Package
- Q&A: Adding a 7-Way Trailer Connector and Brake Controller to a 2004 Jeep Grand Cherokee
- Shop: Brake Controller
- Q&A: Which Trailer Wiring Harness Fits a 2004 Jeep Grand Cherokee Laredo with Factory Tow Package
- Search Results: trailer hitch wiring harness
- Search Results: trailer hitch wiring
- Q&A: Adding a 7-Way Trailer Connector to a 2001 Jeep Grand Cherokee
- Search Results: trailer lock
- Q&A: Trailer Wiring Recommendation for 2004 Jeep Grand Cherokee
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Trailer Wiring Harness Installation - 2005 Jeep Grand Cherokee
- Q&A: Where Does 20 Amp Fuse Install When Installing a T-One Vehicle Wiring Harness on a 2013 Acura RDX
- Video: All You Need to Know About the MaxxTow Coupler Latch Lock for Surge Brake Actuators
- Video: What to Know About the MaxxTow Coupler Latch Lock for Surge Brake Actuators
- Video: An In-Depth Look at the Ark Ezi-Guides Self-Aligning Boat Trailer Loading System
- Video: An In-Depth Look at the CE Smith Post-Style Guide-Ons for Boat Trailers
- Shop: Trailer Hitch
on Trailer Hitch
