Replacement Rubber Plug for EZ-Lube Grease Cap on Tow Dolly
Question:
I have a stehl tow dolly that uses ez lube hubs with metal caps to grease. The cap has a small hole about 3/4 inch for the rubber dust cover. I havent been able to buy the small rubber dust covers. I found larger ones. Can you help me
asked by: Paul G
Expert Reply:
The only rubber dust covers we offer for EZ Lube grease caps are # RG04-010, which are designed to fit a 1.18 inch diameter hole in the grease cap to allow access to the grease zerk without removing the cap. Your best bet would be to simply replace your existing grease caps.
If the outer bearing is # L44643 or # L44649, use the # RG04-040 grease cap with removable plug. This is compatible with most 2000-3500 lb capacity hubs which is typical of what's found on most tow dollies.
To be sure this is the correct cap for you, just measure the inside diameter of the hub bore where the cap installs. If it's 1.98 inches, the # RG04-040 would be the correct replacement grease cap.
If you get a different measurement, let me know and I'll look for a suitable replacement.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Grease Cap Plug for E-Z Lube Grease Caps - Qty 2
- Accessories and Parts
- Trailer Bearings Races Seals Caps
- Plugs
- TruRyde
more information >
Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- EZ Lube Grease Cap
- 1.99 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Replacement Black Plastic Filler Cap for Dexter 7,500-lb Brake Actuators
- Search Results: t097~022~00
- Shop: Grease Cap Plug for E-Z Lube Grease Caps - Qty 2
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Search Results: brake fluid cap
- Article: Overview of Lubricating Grease
- Q&A: Will the Dexter Trailer Hub and Drum Assembly 84546UC3 Work with E-Z Lube Spindles
- Q&A: Can I Use A Wheel Center Cap When Bearing Buddy Is Installed?
- Q&A: Difference Between Hubs # 84546UC3 and # 84546UC3-EZ
- Q&A: Replacement Grease Cap With Rubber Plug For 3,500LB Trailer Axle Hub
- Shop: Americana Trailer Wheel Center Cap w/ Plug - Chrome Plated - 3.33" Pilot
- Shop: 2" Lubed Dust Cap & Rubber Plug - 1.99" x 1.40" x 1.18" - Qty 1
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Lionshead Trailer Wheel Center Cap w/ Snap-In Plug - 3.19" Pilot - Stainless Steel
- Search Results: bearing buddy
- Search Results: dexter ez lube caps
- Q&A: What is the Base of Marine Trailer Wheel Bearing Grease
- Q&A: Is the Base Compound of Lubrimatic Marine Grease Compatible with Lithium Grease
- Search Results: dexter grease
- Search Results: red grease
- Search Results: 3 oz grease
- Shop: Trailer Hitch
- Article: Most Popular Wheel Bearings
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Q&A: What is the Best Grease for Trailer Bearings
- Video: Timken Bearing Kit Installation - Enclosed Trailer
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Brake Controller
on Trailer Hubs and Drums
