Parts Needed To Covert Electric Drum Brakes On Triple Axle Texas Pride Car Hauler To Hydraulic Disc

Updated 05/08/2025 | Published 01/27/2022

Products Featured in This Question

Dexter Oil Hub for 9K to 10K General Duty Axles - After April 2013 - Qty 1

(16)

$385.10

Unitized Oil Seal

(84)

$62.37

Replacement Trailer Hub Bearing - 25580

(2006)

$19.53

Replacement Trailer Hub Bearing - 387A

(58)

$29.80

Hydrastar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi

(217)

$799.95

Hydrastar Hydraulic Brake Line Kit - Triple Axle - 25' Long, 3/16" Main Line

(21)

$241.61

Replacement Oil Cap Kit for 9,000-lb to 15,000-lb Dexter Axle

(244)

$33.37

Kodiak Synthetic Bearing Oil for Oil Bath Hubs - 8 oz Bottle

(41)

$21.99

Question:

I am trying to convert my Texas Pride trailer ober to electric over hydraulic disc brakes bc these drums are garbage and i do not want to worry about brakes ever again! Trailer set up with 3: 9,000 lb, grease, leaf spring, axles! What do i need to fully convert this trailer over!? Thanks!

asked by: Bryan

Expert Reply:

I was able to determine that your 9,000lb axles on your Texas Pride Trailer will accept the Dexter Axle Oil Hub # 008-430-03. It uses the same Outer Bearing # 25580, Inner Bearing # 387A and this will use the Oil Seal # 10-51 which is the same 2.875 inner diameter as your grease seal. You will need the Oil Cap Kit # RG04-270 for the new hubs. And the Kodiak Synthetic Bearing Oil # XLPROLUBE can be used with all manufactures.

The Kodiak Disc Brake Kit # K2R1058D11E will provide you with the calipers, rotors and hardware for one axle. And a HydraStar Electric Over Hydraulic Actuator # HBA16 with HydraStar Hydraulic Brake Line Kit # HS496-253 will take care of the hydraulic portion of the brakes for all 3 axles on the trailer.

So just to recap since you will be doing 3 axles you will need the following parts.

Dexter Axle Oil Hub # 008-430-03 Qty 6
Outer Bearing # 25580 Qty 6
Inner Bearing # 387A Qty 6
Oil Seal # 10-51 Qty 6
Oil Cap Kit # RG04-270 Qty 6 (A spare or 2 may be a good idea incase one is damaged by road debris or a flat.)
Kodiak Disc Brake Kit # K2R1058D11E Qty 3
HydraStar Electric Over Hydraulic Actuator # HBA16 Qty 1
HydraStar Hydraulic Brake Line Kit # HS496-253 Qty 1
Kodiak Synthetic Bearing Oil # XLPROLUBE Qty 3

expert reply by: Bud M

Jorge

4/27/2025

Quick question does the hub needs to be replaced or use the same hub

Robin H.

5/8/2025

@Jorge if your hub/drum assembly is 2 piece and you can pull off the drum then you won't need to replace it. The # K2R1058D11E will slip on over the idler hub. If you can't separate them you need # 008-430-03 as well.