Correct Replacement Hub For Jet Ski Trailer With BT150 Hub
Updated 07/29/2021 | Published 07/28/2021
Products Featured in This Question
Question:
Hello! I recently purchased a used jet ski trailer with a locked up hub. I pulled the hubs and measured the spindle to a circumference of 3 3/8 inches. Thats where I dead end! It has straight spindles but I cant seem to find any hubs with the same inner and outer bearings that fit this size spindle? The original hubs were stamped BT150, the trailer make is Hustler. Any help would be appreciated! Thanks
asked by: Kyle C
Expert Reply:
I would be happy to help!
Based on the BT150 stamped in your hub you will need the CE Smith Trailer Idler Hub Assembly # CE13315 which includes inner and outer bearings # L44649. This hub comes pre-greased and ready to install on the spindle of your Jet Skit Trailer making it a very easy option.
I included a video of the # CE13315 for you to take a look at.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- 25580 / 15123
- Standard Grade
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- 18 Inch Wheel
- 18-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Q&A: Recommended Hub w/ a 5 on 4-1/2" Bolt Pattern that Fits a BTR Spindle w/ L44649 Bearings
- Video: In-Depth Review of the CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Video: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles Spec Review
- Q&A: Should There Be a Washer on Trailer Spindle Between Spindle Nut and Outer Bearing
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" Aluminum Wheel - 5 on 4-1/2 - Load Range C
- Shop: Kenda Karrier ST175/80R13 Radial Trailer Tire with 13" Black Mesh Wheel - 5 on 4-1/2 - LR C
- Shop: etrailer Bearing Protectors w/ Covers for 1.98" Hub Bore - Chrome - Qty 2
- Search Results: lug nuts
- Shop: Chrome Trailer Wheel Lug Nut - 1/2" (Each)
- Search Results: btr spindle
- Search Results: live chat
- Q&A: Replacement Trailer Hub for the TDE 46205 with Galvanized Finish
- Video: Kenda Karrier ST175/80R13 Radial Trailer Tire with 13" Black Mesh Wheel Spec Review
- Video: The Low-Down on the Square BT8 Spindle for 2,000-lb Trailer Axles
- Q&A: What Spindle Fits Hubs that Have Inner and Outer Bearings of L44649
- Shop: CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K
- Search Results: triton trailer bearings
- Video: Wheel Stud Installation on a Boat Trailer
- Video: Breaking Down the Karrier ST175/80R13 Radial Trailer Tire with 13" Aluminum Wheel
- Search Results: hub
- Search Results: lug
- Q&A: Correct Replacement Idler Hub for Triton Jet Ski Trailer with 2,700 lb Axles
- Q&A: Replacement Fenders for 1998 Triton Elite WC-1 Torsion Axle Trailer
- Search Results: reliable axle
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: How to Measure Your Trailer Wheel Bolt Pattern