Recommended Hub w/ a 5 on 4-1/2" Bolt Pattern that Fits a BTR Spindle w/ L44649 Bearings
Updated 09/26/2025 | Published 04/17/2025 >
Question:
Need a new pre-greased hub assy. 2014 Triton Elite WCII double jet ski trailer s/n 104691-002. Has a Reliable brand single torsion 2700lb axle 8351 and 2140421 on sticker. Hub stamped with BT-150 13 T 074. Spindle is 1-1/16 diameter. Hub is 5.56 diameter and 4-1/4 long with 1/2 studs on a 5 x 4-1/2 lug pattern for a 13 wheel.
asked by: Johnnie
Expert Reply:
Thank you for all of the detailed information Johnnie! To replace you jet ski trailer's hub, I recommend the CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles item # CE13315. This pre-greased marine grade hub has a 5 on 4-1/2" bolt pattern and fits 13" wheels. This hub is specifically designed to fit 2,700 lbs axles with BTR spindles like your trailer has.
If you have any additional questions go ahead and throw them into the comment box below.
Product Page this Question was Asked From
CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Marine Grade
- For 2700 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 8 Inch Wheel
- CE Smith
more information >
Continue Researching
- Search Results: deemaxx trailer brakes
- Search Results: e~track
- Search Results: x~track
- Search Results: hub and spindle
- Search Results: spindle and hub
- Search Results: trailer hubs and drums
- Shop: DeeMaxx 13" Hub-and-Rotor Assembly - 8 on 6-1/2 - Maxx Coating - 8,000 lbs - 9/16" Studs
- Shop: Replacement DeeMaxx Disc Brake Caliper - Maxx Coating - 7,000 lbs to 8,000 lbs
- Search Results: oil cap
- Shop: DeeMaxx Disc Brakes - 13" Hub/Rotor - 8 on 6-1/2 - Maxx Coating - Oil - 8,000 lbs
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: Replacement DeeMaxx Disc Brake Caliper - Maxx Coating - 7,000 lbs to 8,000 lbs
- Shop: DeeMaxx Ceramic Brake Pads with Stainless Steel Back Plates - 7,000 lbs to 8,000 lbs
- Q&A: How to Determine Correct Replacement Hub For Jet Ski Trailer
- Q&A: Correct Replacement Hub For Jet Ski Trailer With BT150 Hub
- Q&A: Does Using Bearing Buddy Replace Need for Trailer Hub Grease Seal
- Q&A: What is the Size of the Grease Seal in the BK1-150 Bearing Kit
- Q&A: Replacement Hubs for a Triton 08351 PWC Trailer Axle
- Q&A: Pre Packed Hub To Replace Triton Part 02884 And 07994-P
- Q&A: Replacement Bearing Kit With Bearing Buddy Bearing Protectors To Replace Triton 07994-P Kit



Jerred H.
9/26/2025
Hey Johnnie, did the CE Smith Trailer Idler Hub Assembly work out for your jet ski trailer? I'm asking because your experience could help others with similar trailers.