Determining Which Hubs and Bearings Fit A 2003 Tracker Trailstar Trailer
Updated 06/17/2025 | Published 06/19/2021
Products Featured in This Question
Question:
I have a 2003 tracker trailstar trailer for a 17ft deep v 17. My hub and bearing just broke and I can’t seem to find the sizes I need to replace it.
asked by: Chris M
Expert Reply:
I would be happy to help you find the correct replacement hub, but unfortunately we do not have a breakdown of the specific components your trailer uses so you will need to confirm your bearing combination.
The easiest way to do this is remove the hub on the side that is not damaged and look for the bearing numbers stamped in the face of each bearing as shown in the included picture of the # L44649.
If your bearings are worn to the point that you cannot read the bearing numbers you will need to use digital calipers # PTW80157 to measure the spindle in the locations shown in the included diagram.
Lastly it is important to know your bolt pattern to make sure you get a hub that will work with your wheels. To do this you will want to use the help article I linked that goes over exactly how to measure your bolt pattern.
If you can provide the above information I would be happy to make a recommendation for you.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Finding Correct Bearing Kit For Trailstar Trailer
- Search Results: race l44610 trailer bearings races seals caps
- Search Results: race l68110 trailer bearings races seals caps
- Search Results: bearing kit 68149/lm67048
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Shop: Replacement Race for L44643 and L44649 Bearings
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Timken Replacement Bearing and Race Set - L68149 and L68111
- Shop: Spindle Grease Seal Set for LM48548 or L68149 Inner Bearing and 1.980, 1.968 or 2.562 Bearing Buddy
- Q&A: Replacement Hub for Tracker TrailStar Boat Trailer
- Shop: Trailer Hitch
- Search Results: trailer tires and wheels
- Article: Trailer Wiring Diagrams
- Search Results: spare tire mount
- Q&A: What is the Best Grease for Trailer Bearings
- Shop: Trailer Wiring
- Article: Most Popular Wheel Bearings
- Search Results: trailer leaf springs
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Shop: Suspension Enhancement
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Shop: Brake Controller
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Search Results: trailer hubs and drums
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
on Trailer Hubs and Drums
Jeff
6/17/2025
replacement bearings for trail star . bearing l44694k