Recommended Timbren Axle-Less Suspension W/ 8 on 6-1/2" Bolt Pattern For M101A2 Trailer

Updated 06/04/2021 | Published 06/03/2021

Products Featured in This Question

Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2K

(156)

$948.49

Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6K

(1504)

$216.31

Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2

(547)

$246.31

Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 5 Bolt Flange - 5,200 lbs

(119)

$1286.93

Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 2" Lift - 5 Bolt - 3.5K

(156)

$1286.49

Question:

Good evening I came across this article below on your website ive copied and pasted for you,, and am wanting to accomplish a similar conversion could you help me out possibly... I want to convert my trailer to the timbren axle less suspension with oversized tires id like to convert to electric brakes and keep the gm 8 x6.5 bolt pattern. Can you let me know which timbren kit, brake assy and hub ill need and a qoute please on parts. Regards Converting M101A2 Axle to Timbren Axle-Less Suspension With Brakes Question: I am interested in converting the stock M1010A2 axle to Timbren axle less and change the brakes to electric. I also wanted to convert the hubs into the Toyota 6x5.5 bolt pattern.What will I need? My budget is . It will be an off-road trailer so I need it to accept off-road wheels and take some abuse. Thank you asked by: Chadwick W Expert Reply: In order to use a 6 on 5-1/2 inch compatible hub, youd need to use the # ASR35HDS01 Timbren Axle-Less system which has spindles that would work a hub using that bolt pattern. The system has a 3500 lb weight capacity and is designed specifically for off-road applications. For compatible hubs, use # 8-201-5UC3-EZ which includes the bearings compatible with the Axle-Less suspension I mentioned. The races, grease seal, EZ Lube grease caps and lug nuts are also included. The hubs have 1/2 inch wheel studs. For brake assemblies, use # AKEBRK-6. Ive linked to a demonstration video for the Axle-Less suspension. expert reply by: Mike L

asked by: Breighton

Expert Reply:

I would be happy to help!

There are a few different systems that will work with hubs that have the 6 on 5-1/2" bolt pattern, and the correct one will be dependent on the axle rating of your current axle.

More than likely you will want the Timbren Heavy-Duty Axle-Less Trailer Suspension - 2" Lift Spindle - Off-Road Tires - 3,500 lbs # TASR35HDS06 which has 3500lb rating but uses larger 5200lb hubs so you can have the 8 on 6-1/2" bolt pattern you are wanting, and is designed specifically for larger off-road tires.

If you are planning on the trailer fully loaded exceeding 3500lbs then you will need the # ASR5200S01 instead which have a 5200lb axle rating, but are only available for standard tires.

You will want to match the axle to you anticipated load as using too large of system will cause a stiffer ride due to the stiffer progressive rate AEON main spring.

Both systems will use electric brake assemblies # 23-458-459 and hub and drum assemblies # 8-219-4UC3-EZ which have the 8 on 6-1/2" bolt pattern you are wanting.