Replacement Hub and Brakes for M101A2 Trailer
Updated 01/27/2026 | Published 08/16/2024
Products Featured in This Question
Question:
Hello, I am trying to upgrade my M101A2 trailer to electric brakes and wheels to match my 2016 and 2024 4runners. I came across this previous question, 341338, and would like to confirm that these drum and bearing assemblies are correct for an M101A2. Further, I would like to retain the parking brakes for my trailer and found the following brake assemblies: 23-113, and 23-112. Will this combination work with an M101A2? Thank you.
asked by: Hoplite
Expert Reply:
I wish I could say for sure that the # AKHD-655-6-EZ-K fits but we don't have that information. You will have to identify the bearings on your M101A2 to confirm this. The hub assembly uses the # 25580 inner bearing and # 15123 outer bearing so if that is what you have now it will fit. The # 23-113 and # 23-112 will work with this hub and drum assembly. However, you will have to confirm that you have a 5-bolt brake flange on your axle.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- 25580 / 15123
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: TorkLift Tie Downs - Custom Frame Mount - Front and Rear
- Search Results: curt 51110
- Search Results: 10~36 seal
- Search Results: 51110
- Search Results: trailer brake controller
- Search Results: bearing 25580
- Q&A: Parts Needed To Swap Out The Axle On A 1991 M101A2 Military Trailer
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Front Mount Hitch
- Shop: Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Q&A: Recommended Trailer Wheels for 4 Wheel Army Trailer With 17.5 x 6-3/4 Inch Wheels
- Search Results: m101a2
- Shop: Brake Controller
- Shop: Replacement Trailer Hub Bearing - 2585
- Shop: TorkLift Tie Downs - Custom Frame Mount - Front and Rear
- Shop: TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
- Shop: TorkLift Tie Downs - Custom Frame Mount - Front and Rear
- Q&A: Hubs and Electric Brake Assemblies for M1010A2 Military Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Brake Line Kit that Could be Used with Military Trailer M101-A2
- Shop: Towing Mirrors
- Q&A: Solution for Replacement Hubs Using Obsolete 2585 Inner and 1380 Outer Bearing Combination
- Q&A: Free-Backing Drum Brakes for M101A2 Military Dump Trailer
- Q&A: Recommendation to Add Electric Brakes to a M101A1 Military Trailer While Retaining Parking Brake
- Article: Trailer Wiring Diagrams
- Video: An In-Depth Look at the Dexter Nev-R-Adjust Electric Trailer Brake Assembly
- Video: Checking Out the Timken Replacement Trailer Wheel Bearing
- Video: Ultimate Overview of the DeeMaxx Brake Cable Adjuster for Mechanical Brakes
- Search Results: 23~112~113
- Video: Ultimate Overview of the Replacement Race for 2585 Bearing
Robin H.
1/27/2026
Hey, were you able to confirm the bearing numbers on your M101A2 to see if the hub and drum assembly fit? Knowing how the match turned out could really help others upgrading their trailers the same way. Your update could make it easier for the next person working on an M101A2 brake conversion.