bing tracking image
Q & A Icon

Replacement Backup Light for Peterson 426E on Motorhome  

Products Featured in This Question



Question:

Need to replace motorhome backup light. Lite is PETERSON 426E

0

Expert Reply:

The Peterson 426E is a grommet mount lamp which is 4 inches in diameter. We don't offer that particular lamp, but it cross referenced to several lamps offered by Optronics. Here's what's available:

# BU45CB is a in incandescent lamp that could be used as a reverse light. Compatible with 12V systems
# BUL06CB is a 6-diode LED lamp. 12V compatible
# BUL11CB is a 10-diode LED. 12V compatible
# M826C-7 is a 7-diode LED. 12V compatible
# BUL53CB is a 36-diode LED. 14V compatible
# BUL23CB is a 27-diode DOT approved LED. 12V compatible
• # BUL23C24B is a 27-diode DOT approved LED. 12 or 24V compatible

The mounting grommet is part # A45GB and the mounting pigtail is part # A45CB, both of which are compatible with the lamps mentioned above.

If your current back up lamps are incandescent, you might consider replacing both with LED's. They'll be much brighter and would draw a fraction of the power of an incandescent. They're certainly more expensive, but they last up to 50 time longer.

expert reply by:
0
Mike L

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>