How to Install the Bulldog Replacement Sidewind Handle and Gear Kit
Question:
How do I install the Replacement Sidewind Handle and Gear Kit for 2,000 lb Bulldog Round Jacks, # BD500256.
asked by: Ed
Expert Reply:
Installing the gears is fairly easy, You will need to remove the cap at the top of the jack. The handle and gear are held in place with a roll pin that will need to be removed. You can then remove the handle, square block and gear.
You can then remove the bottom gear by lifting it out. If the bottom roll pin is damaged remove it also and the washer can be replaced after removing the lower pin. I added a photo showing the inside of a Bulldog jack with an external gear box, like part # BD155157, so you could easily see the orientation of parts. If you have a jack with internal gears, like part # BD151109, you will have to work from the opening in the top of the jack.
When replacing the bottom gear on the roll pin be sure to use the shorter pin and that the pin is in the slotted portion of the gear with the closed end groove that will not allow the pin to come out of the side of the gear, see photo. Reassemble in reverse order.
The top gear and bottom gear are the same, you just need to orient the gears correctly with the roll pins.
Products Referenced in This Question
Bulldog Round, Snap-Ring Swivel Jack - Sidewind - 10" Lift - 2,000 lbs - Zinc Finish
- Trailer Jack
- Enclosed Trailer
- Utility Trailer
- Side-Mount Jacks
- Swivel Jacks
- Standard Grade
- 1001 - 2000 lbs
- Manual Jack
- 10 Inch Lift
- Weld-On
- With Rectangle Foot
- Bulldog
more information >
Bulldog Round, A-Frame Jack w/ External Gearbox - Sidewind - 13" Lift - 2,000 lbs
- Trailer Jack
- Enclosed Trailer
- Utility Trailer
- A-Frame Jacks
- Standard Grade
- 1001 - 2000 lbs
- Manual Jack
- 13 Inch Lift
- Bolt-On
- Weld-On
- No Wheel or Foot
- Bulldog
more information >
Product Page this Question was Asked From
Replacement Sidewind Handle and Gear Kit for Bulldog Round Jacks - 2,000 lbs
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Handles and Cranks
- Sidewind
- Bulldog
more information >
Continue Researching
- Q&A: Replacement Wheel For Trailer Jack On Eagle Trailer
- Shop: Fulton Bolt-Thru Swivel Marine Jack - Bolt On - Sidewind - 10" Lift - 1,500 lbs
- Shop: Replacement Tube Cap for Bulldog Round Jacks with a Sidewind Handle
- Shop: Bulldog Round, Snap-Ring Swivel Jack - Sidewind - 10" Lift - 2,000 lbs - Zinc Finish
- Shop: Bulldog Round, A-Frame Jack w/ External Gearbox - Sidewind - 13" Lift - 2,000 lbs
- Video: An In-Depth Look at the Bulldog Round, A-Frame Jack w/ External Gearbox
- Q&A: Replacement A-Frame Trailer Jack that Provides Clearance to Lower Tailgate
- Shop: Pro Series Round, A-Frame Jack - Topwind - Zinc Plated - 14" Lift - 2,000 lbs
- Shop: Pro Series Detachable Footplate w/ Pin for 2" Diameter Jacks - 2,000 lbs to 5,000 lbs
- Q&A: Distance From Center of Hitch Pin Hole to Center of Ball on Curt Adjustable 2-Ball Mount
- Video: Comprehensive Review: Bulldog Round, A-Frame Jack
- Video: A Closer Look at the Bulldog Round, A-Frame Jack Drop Leg and Pull Pin Assembly
- Shop: Bulldog Round, A-Frame Jack Drop Leg and Pull Pin Assembly
- Video: Hands-On with the Bulldog A-Frame Round Jack
- Video: All About the Ram Round A-Frame Trailer Jack
- Search Results: trailer jack
- Video: Curt Round A-Frame Trailer Jack Feature Review
- Video: Detailed Breakdown of the Replacement Footplate for etrailer and Ram 2-1/4" Jacks
- Search Results: trailer jack foot plate
- Q&A: Technical Specifications For Pro Series Round, Snap-Ring Swivel Jack PS1400300303
- Q&A: Measurements of etrailer 2K Snap-Ring Swivel Trailer Jack
- Q&A: Looking for a Bolt-On Jack That is Less Than 11 Inches When Attached
- Q&A: Overall Height of 2K Topwind Swivel Jack # TJBB-2001-B When Fully Retracted
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: trailer hitch
- Article: How to Measure for Trailer Hitch Drop
- Shop: Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Accessories and Parts
