Don't Miss These Holiday Savings!
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Ideal for multiple agricultural and commercial applications, this standard A-frame jack features an 8-5/8" retracted height and measures 13" from the mounting bracket to the top, excluding the handle. Base sold separately.
Features:
Specs:
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (461 Customer Reviews)
Ideal for multiple agricultural and commercial applications, this standard A-frame jack features an 8-5/8" retracted height and measures 13" from the mounting bracket to the top, excluding the handle. Base sold separately.It is a good replacement for what I had and fits nicely under the jack-it bicycle rack stand.
One year in and this has been a great jack. Picks up a lot of weight with no effort. I always keep a bucket or coffee tub over them to keep water out, makes a big difference on the life of them!
The product was as advertised but the customer service at etrailer is exceptional. The product was delivered in the quick timeframe they said it would be and the order was complete. Thanks etrailer. I’ll be back.
the jack works great and bolted right up to trailer
Everything came on time, free shipping, and nothing was damaged in shipping.
Thanks for the service and great Products.
Hurricane Sandy is keeping us from installing the jack. But if the jack works as good as the customer service we'll be fine. Quick delivery!
Excellent product, very fast shipping, I will buy again.
Nice sturdy unit.
Trailer jack It's the same part so it should be a perfect fit.
Excellent service and a quality product !!!
Fit perfect on my Carry-On Trailer.
Direct, bolt-on, replacement for my previous 2000 lb tongue jack. I use it on a 7500 lb (gross wt) flatbed trailer with removeable 4" sides that hauls everything from firewood to cars. I no longer worry about overloading the jack.
Nice finish too. It's the nicest looking thing on the trailer!
This jack works much better than the poor quality original one from china. It gives you more ground clearance and is strong enough to pick up the trailer.
I only have a 14 inch tongue short tongue on my cargo trailer this is the only jacket would work for me boulders right on easy to use works perfect thank you
Thank you for your inquiry. I just yesterday found time to install the Bulldog jack. The package shipped and was delivered earlier than promised, which was a pleasant surprise. I was impressed with the quality of the jack just taking it out of the box. I am more impressed with it on my trailer (Boatmaster with 17.5 Key West Stealth). It operates smoothly and with minimal effort. I chose to store the boat trailer on blocks rather that use a jack wheel as the wheel hangs too low when towing and installing and removing it is just another task I prefer to avoid. This jack replaces one ten years old used primarily in a salt water environment. It is a very good product. I did attach a picture of the jack.
GREAT JACK TO WORK WITH, I RETROFIT IT FOR MY RESTORED VINTAGE TRAILER. WHAT A IMPROVMENT OVER THE ORIGINAL HADCO STRIPPED OUT JACK, WELL AFTER ALL THE ORIGINAL WORKED FOR OVER 40 YEARS IT SERVED ITS TIME.
I love this design. The installation went great until I tried to attach the foot to the end of the stem. The stem would not fit into the foot. So I am waiting for a new foot to match this jack. :( The bolt holes lined up perfectly with the threaded holes in the trailer tongue. The only other features I would like to see for this product would be a waterproof cover to place over the top of it to keep water out of it and a grease fitting to lubricate the gears.
Good prices
Fast service
Well thought-out/ laid-out and informative website - product videos are extremely helpful
Outstanding post-order and shipment tracking
Well packaged for shipping - arrived undamaged and accounted for
What else can you say???
Product shipped in an extremely timely manor and arrived undamaged due to the quality of packaging. This Jack fit the front of my travel trailer (not commercial) just fine and only took minutes to install. My local trailer parts store was selling tongue jacks of half the capacity for nearly double the price. This was an awesome find and I'm glad i chose etrailer for my purchase. I did not rate 5 of 5 only because I have not had a chance to operate the jack.
Product arrived very promptly as I was upgraded to expedited status. Product was exactly as described, packaged well, and met my expectations. Product description and pictures on the website were very accurate and helped me choose the correct trailer jack for my application. etrailer.com is a pleasure to do business with.
Very sturdy construction. My light duty round jack failed in my camper and needed to be replaced. I always wanted a drip leg instead of using blocks. I had t cutout a square hole but well worth the extra effort to have a heavy duty jack with a drop leg. Thanks again to etrailer for excellent pricing and fast free shipping.
Do you have a question about this Trailer Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Vernon J.
8/17/2023
Ive used it a couple of times and it still looks strong.