Replacement Hardware Kit for Curt Trailer Hitch Receiver 13416

Question

Question:

I recently purchased a Curt 13416 Class-3 trailer hitch from 3rd party. But hardware was missing. I need to purchase the following to complete installation for my Toyota RAV4 2020 Hybrid qty-4 Hex Bolt M 12-1.25 x 35 mm cl 10.9 qty-4 Conical-Toothed Washer ,12 qty-1 C 21510 Hitch pin clip Thanks

asked by: Florencio C

0

Expert Reply:

For your Curt # C13416 you will need the Replacement Hardware Kit for Trailer Hitches # RHK. This does not come with the hitch pin clip so you will need # C21510 or # C21500.

expert reply by: Jason S

0

Answer 1

Both the Curt 2" Receiver #C13397 and the 1-1/4" Receiver #C12169 use the same CM-SP2 Square Hole Spacers for the install on your 2018 Honda CR-V. The description of .250 x .88 x 2.25" stands for the dimensions of the spacers…

view full answer...

Answer 2

While grade 8 bolts like you have are recommended to install a class 3 trailer hitch, I do not recommend using the bolts in your picture. For a trailer hitch like the Curt #14001 you were looking at, it uses 1/2" x 13 grade 8 bolts. Hitch…

view full answer...

Answer 3

No, the Replacement Mounting Hardware #C75JR is not going to fit the Curt Class III Hitch #C13135. If you are in need of a hardware kit for the #C13135 hitch, we can provide that with Part #RHK. When you go to the page for #RHK you will see a box…

view full answer...

Answer 4

The Curt Class III trailer hitch for your Pathfinder, part #C13126 would utilize nuts that are welded up into the frame member. The conical toothed washers used in the installation do a good job of maintaining the torque applied to the bolt during…

view full answer...

Answer 5

That is correct, you will want to install the top straps of the Yakima FullBack 3 Bike Rack #Y02633 using the anchor method for your 2017 Chrysler Pacifica. I've installed this rack that way a few times and I found it easier to remove the hooked…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 9

Hi Stephanie! Great question and you’re totally right to ask, because most hitches for the 2024 RAV4 do require a bit of bumper trimming. That includes the Oris Detachable Hitch #TS66VR, since it uses a hidden design that needs a hole cut in the…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

Hi John; we actually have both a hitch and wiring available for your 2025 Toyota RAV4 Hybrid XLE Premium. I recommend the following: -TowSmart Trailer Hitch Receiver #TS42VR OR -Oris Hitches Detachable Hitch #TS66VR -Curt T-Connector Vehicle Wiring…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Replacement Hardware Kit for Curt Trailer Hitch Receiver 13416

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching