Replacing Atwood Mobile Products model MPD 80274 Recommendation

Question

Question:

I am needing to replace an Atwood Mobile Products model MPD 80274. Is the Pro Series Round, A-frame Jack w/External Gear Box - Sidewind - 14foot Lift, PSRV20000103 the best replacement? It is being used to raise and lower the height of a Hoosier Hoops brand basketball goal. Thank you for your help.

asked by: Andy

0

Expert Reply:

The Atwood jack 80274 was an A-frame type side-wind tongue jack with a 2K weight rating which we have several options for that would work great as a replacement. The Pro Series Round, A-Frame Jack w/ External Gearbox # PSRV20000103 that you referenced is a really great solution that would work well.

The only other option really worth mentioning would be the Trailer Valet JXC part # TV54FR which matches all of the same features as the Atwood but also can attach to a power drill to give you a way to crank it up and down easier.

expert reply by: Jameson C

0

Answer 1

Based on my research the Atwood jack 80274 was an A-frame type side-wind tongue jack with a 2K weight rating. The Pro Series jack #PSRV20000103 that you referenced is a suitable replacement for this discontinued product. The Pro Series offers a 2K…

view full answer...

Answer 2

It looks like Trailer Hub and Drum Assembly - 5,200-lb Axles - 6 on 5-1/2 Item #8-201-5UC3 could be the right replacement for you. You can check the bearing numbers if you still have the bearings. If they are 25580 for the inner and LM67048 then this…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hi Hayden; that bolt pattern is really uncommon but I believe it can be found on some really old Airstream trailers. There are no modern replacements that will match. The best option is to replace the hub with one that has a common bolt pattern like…

view full answer...

Answer 8

We have 3 hitches that are designed for use on the 2005 Dodge Durango. I will list them all below. Draw-Tite Trailer Hitch, item #75292 Draw-Tite Trailer Hitch , item #75162 Curt Class III Round Tube Trailer Hitch Receiver, item #13297 Of the 3…

view full answer...

Answer 9

Hello John, I was not able to find that information anywhere, luckily we have one on a trailer right outside. From the top of the mounting plate to the top of the jack is 20 1/4". What kind of trailer were you thinking about putting this on?

view full answer...

Replacing Atwood Mobile Products model MPD 80274 Recommendation

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching