Which B and W Gooseneck Hitch Fits 2018 Ford F-250

Question

Question:

I have a 2018 Ford F250 FX4x4 . Was wondering which BandW turnover ball gooseneck hitch I needed. The GRNK1116 or 1117. Thanks for your time.

asked by: Lee S

0

Expert Reply:

The correct B and W Turnoverball Gooseneck for your 2018 Ford F-250 is the part # BWGNRK1116. I attached an install video for this for you to check out as well on a similar 2018 Ford F-250.

expert reply by: Jameson C

0

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

The airbags that I recommend for your 2018 Ford F-250 are the Air Lift LoadLifter 5000 Air Helper Springs part #AL57399. These airbags will not interfere with the B&W Turnoverball Underbed Gooseneck Trailer Hitch part #BWGNRK1116 as you can see…

view full answer...

Answer 4

Yes, we do. What you are describing sounds like the Inner Frame Brackets for Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Hitch item #RP27FR. I have attached a picture below. These come welded to the frame exactly where you…

view full answer...

Answer 5

Hey David, great questions! The Under-Bed Rail and Installation Kit #RP67KR comes with both the 30183 and 30924 parts of the hitch system and are the same as the Ford OEM puck system. All you need is this kit and you'll have the 4 pucks and…

view full answer...

Answer 6

To know if your 2017 Ford F-350 has an in-bed puck system installed you'll just need to look and see if you have four rounded attachment points (usually covered up when not in use, like in the attached picture). If you don't see these in your…

view full answer...

Answer 7

Hey Kevin, thanks for reaching out! The Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Trailer Hitches #RP67KR is exactly what you need for your 2024 Ford F-250 Super Duty, and it includes the parts needed for the brackets…

view full answer...

Answer 8

If you were to use the 4 inch offset ball #BWGNXA4085 the pin weight on the ball will not be changed. What will change is where the weight is carried on the truck. Using the offset ball will put more weight 4 inches back from the center of the…

view full answer...

Answer 9

If your 2020 Ford F-350 has the OEM prep package you'll see 4 "pucks" and a gooseneck hitch opening in the bed (pictured below). If it doesn't have pucks then you could install the Reese Under-Bed Gooseneck Trailer Hitch w/ Custom…

view full answer...

Answer 10

Great questions! Reese actually makes the OEM puck system for Ford so if the 2022 F-250 is cheaper by a lot then I recommend going that route and installing the Under-Bed Rail and Installation Kit #RP87FR. The only thing you'll really be missing…

view full answer...

Answer 11

Hello Joe, thanks for reaching out. If you were to install a B&W Tunoverball Gooseneck Hitch #BWGNRK1020 you would be able to easily transfer your #BWRVK3400 5th wheel hitch to your new truck. If your new 2025 GMC 2500 HD comes with the factory…

view full answer...

Answer 12

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Which B and W Gooseneck Hitch Fits 2018 Ford F-250

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching