B and W Turnoverball Gooseneck Trailer Hitch Installation - 2018 Ford F-250 Super Duty Video

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Hey Luis, for your 2018 Ford F-350 that doesn't have the OEM pucks you would want the B and W Turnoverball hitch part #BWGNRK1116 that is a confirmed fit for your truck. I really like the B and W gooseneck hitches as they are known to be the…

There is no difference between the B and W Turnoverball Gooseneck hitches #BWGNRK1116 and #BWGNRK1116-5W. We have them separated in our fit guides with two different part numbers since it shows up twice in our fitguide. One as a gooseneck hitch and…

To know if your 2017 Ford F-350 has an in-bed puck system installed you'll just need to look and see if you have four rounded attachment points (usually covered up when not in use, like in the attached picture). If you don't see these in your…

Yes, we do. What you are describing sounds like the Inner Frame Brackets for Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Hitch item #RP27FR. I have attached a picture below. These come welded to the frame exactly where you…

The 4 inch hole that you cut in your truck bed in order to install the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1116 is correct. The slight gap that you have between the socket for the hitch ball and your bed is not an issue. As…

I believe you are asking about the plastic foot pads that come with the B&W Companion 5th Wheel Trailer Hitch part #BWRVK3500-5W that fit into the corrugated lines of the bed to give you a better fit. These foot pads are only manufactured by…

If the lift on your 2016 Ford F-250 is a suspension lift you almost definitely are going to need spacers. If it's a body lift you won't. With that being said a 4 inch suspension lift doesn't always mean you need a 4 inch spacer. You need…

Yes, the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear Axle #AL88375 are compatible with an in-bed hitch like the #BWGNRK1319 you have in your 2021 Ram 1500. These will help keep you level and improve…

While the best and most certain way to tell if your 2018 Ford F-250 has the puck system is to call your local Ford dealer with your VIN, it should be pretty easy to tell otherwise. If your bed looks like the accompanying photo - with four accessible…

The OEM puck system is optional for Ford pickups so the only way to tell if your 2017 Ford F-250 has the puck system or not is to physically look in the bed for the pucks like what you see in the attached photo. If you do have the puck system then I…

Thank you for the pictures you sent to help verify the 6401 air bag used in your old #F2400 kit. Unfortunately the compatible kits for your 2020 Ford F-250 Super duty use the 8397 and 6397 air bags so you won't be able to just swap out the…