How To Measure To Replace Bent Trailer Axle
Question:
My tires have an inside wear can the axles be adjusted to correct this Bent axle
asked by: David F
Expert Reply:
It is normal for a round axle to have somewhat of a bow pointing up in the center such as the Dexter Trailer Axle Beam with EZ-Lube Spindles part # T3584F-EZ-8974 so that it can flatten out under a load. However if you trailer axle is bent somewhere else, bent down or bent up more than the accompanying photo then you will need to replace it to avoid uneven tire and suspension wear. There is not really a way to adjust it.
To replace the axle you would need to measure from hub face to hub face and then from spring center to spring center to get the correct replacement axle. You will also need to know the axle capacity of your existing axle. I have attached a diagram for your reference. For example the Dexter Trailer Axle I mentioned earlier part # T3584F-EZ-8974 measures 89" hub face to hub face and 74" spring center to spring center.

Product Page this Question was Asked From
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Search Results: dexter 3500
- Article: How to Raise Your Travel Trailer Height
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Shop: etrailer Rust-Resistant 5-Leaf Double Eye Spring for 6K Trailer Axles - 25-1/4" Long - Dacromet
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/8" Long
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - 2" Lift - 5 Bolt Flange - 3,500 lbs
- Shop: etrailer Rust-Resistant 3-Leaf Double Eye Spring for 4K Trailer Axles - 25-1/4" Long - Dacromet
- Q&A: Availability of 25-1/4 inch Long Leaf Springs with Width of 1-3/4 inches
- Q&A: Recommended 26 Inch Leaf Springs for 3750 lb Tandem Axle Boat Trailer
- Q&A: Recommended Replacement for 25-1/4 Leaf Spring for 3,500 Lb Axle
- Q&A: Do 3 Leaf Springs Have Thicker Leaves than 4 Leaf Springs
- Q&A: Options to Increase Height of Trailer for Better Suspension Clearance and Level Towing
- Q&A: Picking Out Trailer Leaf Spring for Trailer that Weighs 3,000 lb
- Q&A: How To Choose Correct Replacement Leaf Springs for a Gulf Stream Vintage Cruiser
- Shop: Trailer Hitch
- Search Results: trailer leaf springs
- Video: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
- Article: Trailer Wiring Diagrams
- Search Results: trailer suspension parts
- Shop: Brake Controller
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Search Results: trailer tires and wheels
- Shop: Suspension Enhancement
- Video: Hands-On with the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket
- Article: Double-Eye Trailer Suspension System Review
- Search Results: trailer axles