Comparing the Curt Hitch C13416 and EcoHitch Hitch 306-X7396 for a 2019 Toyota RAV4

Question

Question:

Hello, I saw many replies that you recommend the Curt bolt-on hitch for the 2019 Rav4 hybrid. I was wondering if you could explain the benefits / differences of the Curt vs the EcoHitch Hidden hitch? I am getting a 2019 Rav4 Hybrid and intend to use the hitch for bike rack / cargo carrier / extremely light towing i.e. row boat Thanks

asked by: Trey

0

Expert Reply:

The main difference between the Curt Trailer Hitch Receiver part # C13416 and the EcoHitch Hidden Trailer Hitch Receiver part # EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of vehicle which you can see in the attached photo.

The other difference between the EcoHitch option and the Curt option is that the EcoHitch has a 5,000 lb towing capacity whereas the Curt only has a 4,000 lb towing capacity but you will still be limited by your RAV4 if it is lower than these figures.

expert reply by: Conner L

0

click to enlarge

Blake D.

5/12/2020

It seems like you also lose some of the vehicle's original ground clearance (I think it's 8.1 inches) if you use the Curt? Is that correct? Looks like it hangs lower than the exhaust in the pictures whereas the Eco Hitch is tucked up higher (but requires a small cutout on the bumper).

Reply

Chris R.

5/14/2020

You're exactly right. The Curt option would hang lower than the EcoHitch and thus cut into the vehicle's ground clearance just a bit. Another nice benefit of the hidden design on the EcoHitch # 306-X7396.

Reply

Chris R.

5/14/2020

You're exactly right. The Curt option would hang lower than the EcoHitch and thus cut into the vehicle's ground clearance just a bit. Another nice benefit of the hidden design on the EcoHitch # 306-X7396.

Reply

Sue

3/16/2021

@ChrisR Ecohitch 2" says it requires "Fascia trimming required". I've seen posts indicating that you could avoid cutting but the receiver would just push up the bottom of the bumper cover a little. Can you confirm this please? It's a lease and I don't want to give them an excuse to rack up damages;-) Will go with Curt 2" if that's the better option. Only using it for cargo tray and bike rack, no towing. Also do you have the "stealth" version with the removable receiver?

Reply

See All (4) Replies to Blake D. ∨

Answer 1

Hey Miles, yes we have confirmed that the EcoHitch part #EH97FR does fit the 2025 Toyota Rav4 Hybrid Plug In. There is some lower fascia trimming needed to install the hitch but not a significant amount at all. What will you be using the hitch for?

view full answer...

Answer 2

The trailer hitch receiver that fits your 2024 Toyota RAV4 and has the best clearances - both bumper clearance and ground clearance - is the EcoHitch, with the correct fit for the '24 RAV4 being the following: - EcoHitch Hidden Trailer Hitch…

view full answer...

Answer 3

Hi John; we actually have both a hitch and wiring available for your 2025 Toyota RAV4 Hybrid XLE Premium. I recommend the following: -TowSmart Trailer Hitch Receiver #TS42VR OR -Oris Hitches Detachable Hitch #TS66VR -Curt T-Connector Vehicle Wiring…

view full answer...

Answer 4

The most concealed hitch for a 2024 Toyota RAV4 is the EcoHitch item #EH97FR. This hitch fits all models of the 2024 RAV4 including the Prime. The EcoHitch is custom fit and bolts to your Toyota with included hardware. It is a class III hitch with a…

view full answer...

Answer 5

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 6

The etrailer class 3 hitch #e23ZR will be a good fit for your vehicle. It likely will affect/interfere with the hands free lift gate sensor. In most cases, the sensor will still work, it just works a bit differently. The hitch receiver basically sits…

view full answer...

Answer 7

The Thule Hullavator Pro, part #TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those…

view full answer...

Answer 8

We have three options for class III hitches for your 2022 Toyota RAV-4 Prime. The Curt Hitch Receiver item #C13416 and the etrailer item #e23ZR are nearly identical and provide about the same amount of ground clearance, If I had to choose between…

view full answer...

Answer 9

Yes, the EcoHitch Hidden Trailer Hitch Receiver #EH97FR will fit both the standard 2024 Toyota RAV4 and RAV4 Hybrid. I have linked some of our installation videos at the bottom of the page showing the install on both a standard RAV4 and the Hybrid…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

I went ahead and contacted my tech at Torklift (the makers of EcoHitch) about the #EH97FR, and he confirmed that all M12 hardware will be torqued to 70 ft/lbs and all 1/4" hardware will be torqued to 8 ft/lbs. I went ahead and attached the step…

view full answer...

Answer 12

Hey Piotr, thanks for reaching out! The weight ratings between the Curt Trailer Hitch Receiver #C94WR and Towsmart Trailer Hitch Receiver #TS96VR that fit your 2025 Kia Sportage are determined by the testing done according to those manufacturers. I…

view full answer...

Comparing the Curt Hitch C13416 and EcoHitch Hitch 306-X7396 for a 2019 Toyota RAV4

Continue Researching