Replacement Landing Gear for 2005 Montana 5th Wheel Trailer

Question

Question:

I have a 2005 Montana 3650rk and need to replace landing gear. Which model would be best I have 35 1/2 inches between weld stops. Will my existing motor bolt up?

asked by: George

0

Expert Reply:

The Keystone Montana line actually uses a unique, custom landing gear system from Lippert. The correct OEM replacement legs are # LC178653 for the Lead Leg and # LC178652 for the Follow Leg. You mentioned having a distance of 35-1/2 inches between the weld stops on your existing leg, but I'm wondering if you meant to type 15-1/2 inches. I have attached an image with the specific dimensions labeled for these replacement legs so you can be sure they will line up with your brackets.

You can indeed use your current motor as long as it is in good condition.

expert reply by: Chris R

0

click to enlarge

Answer 1

Lippert made specific replacement landing gear for your 2011 Keystone Montana 5th Wheel. Replacement Lead Leg for Keystone Montana 5th Wheel Landing Gear #LC178653 and Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear #LC178652.

view full answer...

Answer 2

The Keystone Montana is unique in that it has its own set of landing gear legs with three weld stops (tabs) instead of two, and the only option we offer for that is a set of replacement legs: - Replacement Lead Leg for Keystone Montana 5th Wheel…

view full answer...

Answer 3

Hey Greg, so we know that your 2010 Keystone Montana 3150RL has 7k axles so we can help convert it to electric over hydraulic brakes. We have everything you need actually too in a single kit with the part #HSE7K-T1 which comes with best and most…

view full answer...

Answer 4

It is possible that there is a part number somewhere that would help identify the landing gear on your trailer. Sometimes there is information on the underside of the caps on the tops of the jacks so that is another place you can check if you…

view full answer...

Answer 5

There are a few things that go into making sure you choose the correct replacement landing gear. First you need to be sure that the landing gear is rated properly. If you check out the weight rating on your current landing gear just make sure the…

view full answer...

Answer 6

The bracket spacing between the two different size Lippert landing gear legs are not the same. The 33-1/2 inch legs have spacings of 19-1/2 and 21-1/2 inches whereas the shorter legs are 15-1/2 and 17-1/2 inches.

view full answer...

Answer 7

Any powered landing gear or powered tongue jack will draw less power as it legs descend down toward the ground and much more as soon as they make contact and encounter resistance. This is a normal occurrence. In the same way, any jack - even a manual…

view full answer...

Answer 8

The weld stops on the legs of Stromberg-Carlson landing gear set #LG-1 are indeed 17-1/2 inches measured from the top of the top one to the bottom of the bottom one. If you look at the diagram I have included you will see that they have measured from…

view full answer...

Answer 9

For your 2018 Jayco 5th wheel 29bhds, determining the weld stop locations will help you determine the correct replacement lead leg for your trailer. For instance the typical weld stops are 17-1/2 inches from outside to outside like you find in the…

view full answer...

Answer 10

If you have measured your landing gear like in the accompanying diagram and the frame clamps are 18-1/2 inches apart you have an uncommon spacing; you can use the Landing Gear Set #LG-183708 but would need to have a welder come in and remove your…

view full answer...

Answer 11

The difference is the height; the Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg #LC179013 and Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2" #LG-179013 is the lengths. The Stromberg-Carlson…

view full answer...

Replacement Landing Gear for 2005 Montana 5th Wheel Trailer

Product Page this Question was Asked From

Continue Researching