Can Friction Sway Control Be Added to a Class II 1-1/4 Inch Non-Weight Distribution Hitch
Products Featured in This Question
Question:
I am pulling a micro camper with my 11 Subaru Outback, R3.6 Limited. Camper dry wt is 1550# and max load is 2500#, using a std class II hitch not wt distribution, that I got from etrailer.com. Hitch wt capacity is 300#, and I am paying careful attention to hitch weight. We are towing well, but notice some sway over 60MPH, and some rocking depending upon pavement surface quality. I am considering adding an anti-sway friction bar to attempt to reduce rock and sway. Can I add an anti-sway bar to a non-wt distributing hitch? Will an anti-sway bar reduce my rocking, as well as my sway at higher speeds? Thanks
asked by: Neil
Expert Reply:
Proper trailer loading is your first-line defense against dangerous instability and sway. Heavy items should be placed on the floor in front of the axle. The load should be balanced side-to-side and secured to prevent shifting. Tongue weight should be about 10 to15 percent of gross trailer weight for most trailers. Too low a percentage of tongue weight can cause sway. Load the trailer heavier in front.
You can add a friction sway control like the Reese Friction Sway Control Kit, part # 83660, to a Class II non-weight distribution hitch. You will need the Reese Sway Control Bracket, part # RP26005 that mounts to your Class II 1-1/4 inch hitch and gives you an attachment point for the sway control system. I am including a link to the installation instructions on the Reese friction sway control.
The friction sway control kit does not work with surge brakes and needs to be removed when backing up the trailer. It will help with some rocking but is designed more to help with sway from winds, curving roads or sudden maneuvers. If you are getting rocking from an uneven surface it will not prevent that.
I am including a link to a FAQ page on weight distribution.

Product Page this Question was Asked From
Reese Friction Sway Control Kit - Economy - by Draw-Tite, Reese and Hidden Hitch
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: dismount code fbf99
- Shop: Trailer Hitch
- Shop: Fastway e2 Weight Distribution w/ Sway Control - Trunnion - 4,500 lbs GTW, 450 lbs TW
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Reese Pro Round Bar Weight Distribution w/ Sway Control - 6,000 lbs GTW, 600 lbs TW
- Search Results: trailer hitch ball
- Search Results: hitch ball
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Q&A: What is the Best Hitch for a 2024 Toyota Sienna?
- Q&A: Choosing Between Fastway e2 and Curt TruTrack Weight Distribution System for 2015 Grey Wolf 26RL RV
- Q&A: Availability of Weight Distribution for 1-1/4 Inch Receivers
- Shop: Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 6K GTW, 600 lbs TW
- Shop: Reese Weight Dist Shank - 12-1/4" Long - 2" Drop to 6-1/2" Rise - 1,500 lbs TW
- Shop: RV Power Cord
- Shop: Curt TruTrack 2P Weight Distribution System w/ Sway Control - 7-Hole Shank - 10K GTW, 1K TW
- Q&A: Is There a 1-1/4" Ball Mount with a 1" Diameter Hitch Ball Shank Diameter
- Q&A: Can Sway Control be Used on a Trailer without Using Weight Distribution
- Q&A: Can Weight Distribution be Used with a Class II Trailer Hitch on a 2010 Subaru Forester
- Video: All About the Reese Sway-Control Bracket for 2" Ball Mounts
- Search Results: 2 jacks camper jacks
- Search Results: leveling jacks camper jacks
- Search Results: trailer hitch lock set
- Search Results: trailer hitch lock
- Shop: Towing Mirrors
- Q&A: Sway Control Bracket that Fits 2 inch Hitch Ball Mount