Dimensions for Draw-Tite Max-Frame Trailer Hitch # 75528
Updated 05/25/2018 | Published 05/24/2018
Question:
Need dimensions on the Draw-Tite 75528 trailer hitch
asked by: John J
Expert Reply:
I went out to our warehouse to take a couple measurements on the Draw-Tite Max-Frame Trailer Hitch Receiver # 75528 that you referenced.
I measured a distance between the bolt holes on the left and right side brackets to be right at 43-1/4 inches, on center. The distance between the two bolt holes on the bracket is 2-1/4 inches, on center. I have attached an image with these dimensions labeled that you can also check out.
This Class III hitch is confirmed to fit the following vehicles:
2007 - 2016 GMC Acadia
2017 - 2017 GMC Acadia Limited
2008 - 2017 Buick Enclave
2007 - 2010 Saturn Outlook
2009 - 2017 Chevrolet Traverse
2018 - 2018 Chevrolet Traverse Limited
If you need any other specific measurements on the hitch, please let me know and I will be happy to get them for you. I have also attached the installation instructions for the hitch that you can take a look at.
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 7500 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Draw-Tite Ball Mount - 3/4" Rise, 2" Drop - 10-1/2" Long - 6,000 lbs
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Curt Mounting Bracket for 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Video: What to Know About the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package
- Q&A: Replacement Hardware Kit For 2012 Chevrolet Traverse Trailer Hitch Receiver
- Q&A: Can the Rear Fascia Door Be Re-Installed On a 2016 GMC Acadia with etrailer Hitch
- Search Results: 2923
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C56181 Review
- Shop: Brake Controller
- Shop: Suspension Enhancement
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: What to Know About the Draw-Tite Ball Mount
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Search Results: tow package wiring harness
- Search Results: 118270
- Q&A: Cleaning Threads of 2014 Chevy Traverse to Allow Install of Trailer Hitch
- Q&A: Is Loc Tite Needed when Installing Draw Tite Trailer Hitches
- Q&A: T-One 4-Pole Trailer Connector For 2015 Buick Enclave Without Towing Package From Factory
- Q&A: Will Tow Ready T-One fit 2015 Chevrolet Traverse
- Video: DIY Install: Draw-Tite Max-Frame Trailer Hitch Receiver on your 2014 Chevrolet Traverse
- Video: Ultimate Overview of the Bauer Products 4-Way Trailer Plug Holder
- Video: Brophy Mounting Bracket for 4-Pole Flat Trailer Connector: The Breakdown
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Finding the Right Trailer Wiring Harness
- Search Results: trailer hitch
- Article: My Trailer Hitch Doesn't Fit
on Trailer Hitch
