What to Know About the Draw-Tite Ball Mount Video

I went out to our warehouse to take a couple measurements on the Draw-Tite Max-Frame Trailer Hitch Receiver #75528 that you referenced. I measured a distance between the bolt holes on the left and right side brackets to be right at 43-1/4 inches, on…

We sure do. You will need the Replacement Hardware Kit for Trailer Hitches #RHK. Follow that link and you can input your hitch information and vehicle and it will give you the Replacement Hardware you need to get you going. For example if you have…

The etrailer Trailer Hitch Receiver part #e98863 is what I recommend for a 2016 GMC Acadia as it will allow you to re-install the rear fascia door. The rear fascia door is the plastic cutout panel in the rear bumper that gets removed to show access…

We don't have a wider bracket than the #RP26005 for your ball mount so the best option we would have would be a new ball mount that has the bracket already attached like the Curt #D320 which has a drop of 2 inches since you aren't wanting to…

I am sorry, but the Curt Ball Mount with Sway Control Bracket, part #D320, is only offered with the sway control bracket on the right side. We do offer a Sway Control Tab, part #3442, that you can weld onto a ball mount. Or, we also offer a Sway…

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

You can use a friction sway control bar such as #83660 on the left or the right side of the trailer. It doesn't matter. As they come they are set up for the right side of the trailer. But they can be used on either side. For this style of sway…

If the total weight of your pop up camper is 3,300 lbs then you would need a wheel/tire combo that at least has the capacity of 1,650 lbs. The closest tire we have to that capacity in your size is the part #AM10210 which has a 1,610 lbs at 65 psi…

It sounds like you are definitely on the right track. On a 2014 GMC Acadia The plug for the wiring harness #C56245 should be behind a trim panel behind the passenger side wheel. Sometimes locating these plugs can be tricky, and vehicle manufacturers…

I have attached a picture of the Curt Trailer Hitch Receiver item #C99FR installed on a 2022 Toyota Highlander XLE. This Highlander has the 235/65R/18 wheel and tires. You will be able to see what a tight fit the spare tire has between the hitch…