Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
Updated 05/29/2020 | Published 12/01/2017
Products Featured in This Question
Question:
Looks like I need the 5 on 4-1/2" hub. Next question. Would the hubs work with the bearing buddy?
asked by: Mark D
Expert Reply:
The Dexter "8-248" is a hub assembly for 3,500 lb axles that uses an L68149 inner bearing and a L44649 outer bearing. This hub assembly was offered in both 5 on 4-1/2" and 5 on 4-3/4" bolt patterns therefore you would need to confirm your bolt pattern in order to choose the correct hub. I have attached a help article to help you find this as well.
I have also attached my recommendations on each hub for you below.
Dexter:
5 on 4-1/2" - part # 84545BX
5 on 4-3/4" - part # 845475UC1
Isaac D.
5/27/2020
how long is stud
Chris R.
5/29/2020
Pat
5/28/2020
I have a Dexter 8-248 hub. Is there a 6 bolt hub that uses same bearings that i can swap to.
Chris R.
5/29/2020
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Search Results: bullet proof hitch
- Search Results: adjustable ball mount
- Search Results: 50~85~315
- Search Results: breakaway kit
- Search Results: hydraulic jack
- Search Results: equalizer
- Shop: Trailer Hitch
- Search Results: bearing buddy
- Shop: Trailer Wiring
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: RV Designer Safety Lock Pin - 1/4" x 3- 1/2"
- Shop: Adapter Rails for Curt 5th Wheel Hitch - Ford and Chevy/GMC Towing Prep Package
- Video: Review of etrailer Trailer Jack - Manual Sidewind A Frame Jack Drill Adapter - e88GV
- Video: A Closer Look at the Dexter Vault Hybrid Lubrication System for 2,500-lb to 3,500-lb Trailer Buddy A
- Video: Review of the Dexter Trailer Idler Hub Assembly for 3,500-lb Axles
- Q&A: What is Meant by Triple Lip Seal of Dexter Grease Seal # DX49CR
- Video: Review of Stillwell Trailer Jack - Hydraulic Trailer Jack with Connection Kit - ST87VR
- Video: Review of Dexter Axle Grease Zerks EZ Lube Spindle - DX76HR
- Q&A: Replacing The Zerk Fitting On A Dexter EZ-Lube Trailer Axle
- Video: All You Need to Know About the Trailer Hub and Drum Assembly
- Video: Protect Your Bearings! Inside Look at Bearing Buddies with the Manufacturer
- Shop: Base Plate for Tow Bar
- Q&A: I Need to Replace My Hub that has 8-248 Printed on It
- Q&A: Replacement Bearings and Seals for Lippert 4,400 Lb Axle
- Q&A: Correct Torque Rating for a Trailer Wheel Spindle Nut
- Q&A: Lookiing To Upgrade Axles On 2015 Keystone Cougar 33RBK
on Trailer Hubs and Drums
Mark
12/1/2017
Looks like I need the 5 on 4-1/2" hub. Next question. Would the hubs work with the bearing buddy?