Result: adjustable ball mount

Hello again Joseph. The Curt T-Connector #C24ZV will indeed fit all trim levels of the 2025 Mazda CX-70. I double checked with Curt and confirmed this. It will fit all models of the 2025 CX-70, as well as all models of the 2024-2025 CX-90. I have…

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

I have linked an installation video for the Curt Trailer Hitch Receiver #C25FV near the bottom of the page. This is performed on a 2024 Mazda CX-90. I do recommend installing the Curt T-Connector Vehicle Wiring Harness #C24ZV when you install the…

To install the BAKFlip G2 Hard Tonneau Cover #BAK26525 on your 2021 Nissan Titan 5-1/2 Foot Bed with Utili-Track System you'll need to follow the steps listed below: 1. Slide the front half of the clamp into the rail in the tapered slot. Position…

From your photo, it looks like you need the replacement side adjustment bolt for Fastway Solid-Tow Adjustable ball mounts part #DTBM29. The side adjustment bolt tightens the ball platform to the ball mount.

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Congrats on the new SUV. To add a hitch to your 2023 Kia Telluride, I recommend the Curt Trailer Hitch item #C13420. This hitch is custom fit and bolts to your Kia with included hardware. This is a class III hitch with a 2" receiver. It has a…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hi Joe, Yep, you heard correct, you can go from a 2 inch shank to a 2-1/2 inch shank with your Reese weight distribution hitch without issue. One of the following 2-1/2 inch shanks should have the right rise/drop for your application. Here are the…

It sounds like you're looking for the distance from the center of the hitch pin hole to the center of the ball on the Curt Adjustable 2-Ball Mount #C99NR. That measurement is 12-1/4".

You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…