Wiring Diagram for Lippert Stabilization Jack LC298707

Question

Question:

What is the wiring diagram for the LC298707. There are no instructions or diagram to show the wiring schematic.

asked by: Ed M

0

Expert Reply:

I have included a picture showing how the motor and switch wire up on the Lippert stabilizer jack # LC298707.

expert reply by: Michael H

0

click to enlarge

Richard V.

8/8/2020

I have a 2014 jayco eagle 27.5 with the lippert electric jack, my wiring fell off at the vinyl coating at the connectors, will like to know if a wiring diagram is available please note a also have a remote that powers jacks all the wiring diagrams have only a switch and power. What I'm looking for a a diagram that shows the wiring that includes the wires for a remote. Thanks,

Reply

Jon G.

8/18/2020

Since it sounds like your stabilizer system is connected to a larger section of your Jayco you might need to reach out to Jayco directly to see if they have a specific wiring diagram for your application. The only stabilizers we have include the High-Speed # LC298707 which comes with the switch, and the Ground Control TT # LC672136 which does come with a controller, but all of the connections are plug and play.

Reply

Richard V.

8/18/2020

@JonG Thanks for you're response, the wires are not plug and play, they are joined by metal wire nuts, that's why they rusted apart, the reason I sent you this problem is the advise from Jayco because they don't have a drawing, now I'm in a pickle. The drawing above would be a simple fix but would not operate my remote

Reply

Jon G.

8/28/2020

@RichardV I'm sorry to hear that. I wish that wiring diagrams were universal with colors and everything but unfortunately they are not. I'd try checking some of the forums that are dedicated for Jayco owners to see if someone could send you a pic of their setup if what you're trying to connect is OEM.

Reply

Answer 1

For your Lippert Components Power Stabilizer Trailer Jack #LC298707 the wiring is pretty simple. There are two wires that come out of the motor and they are both used as power or ground depending on the direction you want to turn the motor. To…

view full answer...

Answer 2

I have attached some diagrams of the wiring for the Lippert Replacement Hydraulic Power Unit with 2-Quart Pump Reservoir Kit for RV Slide-Out IRC System #LC141111. The first one is from my contact at Lippert and some of the extra wiring is from their…

view full answer...

Answer 3

I spoke with my contact at Lippert regarding the issues you are having with the Ground Control 3.0 Leveling System #LC358590. He actually stated that this system requires a 15 amp fuse at the wiring panel so the problem may have simply been due to…

view full answer...

Answer 4

I attached the wiring diagram you referenced for the Lippert Power Steps Module #LC301702. The second green wire would get grounded to the chassis of the step. The extra wire you mentioned would just need to be capped off and not used like you said.…

view full answer...

Answer 5

The #LC53ED is the correct replacement control brain for the Lippert 4 point leveling system on your motorhome. It is essentially the same controller for ALL Lippert 4-point leveling systems. This leveling system is common on fifth wheels, but we…

view full answer...

Answer 6

Yes it will; Lippert has verified the correct replacement for your 175226/12656 control brain is indeed the following: - Replacement Lippert Leveling Control Brain for 4-Point Leveling System #LC53ED

view full answer...

Answer 7

It appears that all you going to need is the Replacement Lippert 4-Point Leveling System Control Brain Wiring Harness #LC178278. This wiring harness will allow you to plug your new Replacement Lippert Leveling Control Brain for 4-Point Leveling…

view full answer...

Answer 8

The Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote - 4-Point Set #LC358590 has 4 35-amp fuses located on the controller. Attched is a complete wiring diagram for you to check out.

view full answer...

Answer 9

I have a solution but unfortunately we do not currently have a replacement available based off of the serial number provided. For a great replacement the Electric Jack w/ Footplate part #EJ-3520-BBX would work and work well. It had 25 1/8" of…

view full answer...

Answer 10

For your 28' enclosed trailer I recommend the Furrion Chill HE RV Air Conditioner System - Single Zone - 15,000 Btu - Black #FR23PV. If the ceiling of the trailer isn't too high and you can reach the air distribution box and don't want to…

view full answer...

Answer 11

Yes, I have attached the wiring diagram of the Replacement Electric Jack Switch with Harness #LC387874 for you to reference. Basically the Blue wire goes to a 6A auto reset breaker, like part #LC134181, which then goes to the positive circuit for…

view full answer...

Answer 12

I have included a picture showing how the motor and switch wire up on the Lippert stabilizer jack #LC298707.

view full answer...

Wiring Diagram for Lippert Stabilization Jack LC298707

Product Page this Question was Asked From

Continue Researching