Brake Controller Wiring Harness Location 2017 Jeep Cherokee

Question

Question:

I read your answer to another question asking for the brake controll plug in location and under the dash it is. But where exactly and what might help me to identify it. Ive looked everywhere under the left of steering column area and basically everywhere else. Ive already purchased the prodigy p2controller and nec. Plug adapter. Please help. Pictures would be great. I DO HAVE AN OEM INSTALLED TOW PACKAGE

asked by: Chad B

1

Helpful Expert Reply:

As you can see at the 1:20 mark in the attached video, the factory brake controller harness on your 2017 Jeep Cherokee will be located under the driver's side dash panel. The connector will be grey in color and positioned just to the left of where the brake pedal mounts to the firewall.

In addition to the video, I have attached a photo per your request of the harnesses location.

expert reply by: Conner L

1

click to enlarge

Robert M.

6/28/2020

i purchased the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers for the 2018 Jeep Grand cherokee with the OEM Towing package. The Jeep wire harness is male. but your harness also is male, as i have seen after receiving it. What can i do?

Reply

Chris R.

7/2/2020

The "male" plug that you're seeing under the dash of your Jeep is just a cap. This needs to be removed to expose the female plug that the adapter will plug into.

Reply

Terry K.

7/10/2020

ON the 2017 jeep sport hawk is it a port or a pig tail as I can't find either you talk about taking the screw out to remove black cover under das did that cover does not to come down I am afraid I will break something this vehicle came with factory tow and 7 prong R V plug need help thanks Terr

Reply

Chris R.

7/15/2020

If your Jeep came with the factory tow package there will be an actual port/plug behind the dash that you'll use to install a trailer brake controller. You will indeed have to pull off that panel in question to expose it. If you're uncomfortable doing this you could bring it up to a local Jeep dealer for some help.

Reply

Dennis G.

8/13/2020

My 2017 Jeep did not come with the factory tow package. I added a hitch from eTrailer and then had the dealership re-flash the control chip ($60). There is also no wiring harness with plug under the steering column or brake assembly. I assume I will need to have a professional install a harness. Can you recommend which wiring I should buy?

Reply

Jon G.

8/26/2020

I'm guessing that you already have wiring installed on your Jeep? If it's just a 4-Way flat then you need to use the # ETBC7 wiring kit and use that to splice in a brake controller. All of our brake controllers come with a pigtail that you will use to splice everything in. As an example check out the product page for the Prodigy P3 # 90195. You will need to connect the following color wires from your pigtail to the following functions: Blue - 7-Way Output to Trailer Black - 12V Power White - Ground Red - COLD Side of Stop Light Switch (only gets hot when brake pedal is pressed)

Reply

Answer 1

All you need is a ball mount that allows you to tow the trailer level. You can measure for the amount of rise needed to select the correct model. A ball mount with rise is needed when the trailer coupler is higher than the hitch receiver on the…

view full answer...

Answer 2

Thank you for your multiple recent purchases from etrailer. We appreciate your confidence in us and your repeat business. Thank you also for your included photo. There is a straightforward question/answer process to let you determine if a brake light…

view full answer...

Answer 3

It could just be a fuse on your 1999 Chevy 2500. Check the owner's manual and fuse panel lids to see if there is a separate fuse for trailer brake lights. It could also be a stop light or CHMSL fuse that is blown. If Your 1999 Chevy is an actual…

view full answer...

Answer 4

This sounds like a ground problem on the right side. The turn signal not working makes sense because with the brake lights, there is a constant signal coming through which is enough to make the lights illuminate on both sides like they should. But…

view full answer...

Answer 5

Thank you for all of the details in your question. It looks like you have a faulty ground or some corrosion in one of your connectors. On a trailer the functions for your turn signals are also tied into the brake lights so if your right turn signal…

view full answer...

Answer 6

The Curt Spectrum Trailer Brake Controller part #C51170 will illuminate even without a trailer connected that is correct. If you don't wish to see this light each time you hitch the brakes without a trailer attached then you will either need to…

view full answer...

Answer 7

On your 2017 Jeep Grand Cherokee Sport Trail the connector needed to plug in a brake controller install harness is behind the black cover located to the left of the steering column just above the carpet. Check out the attached picture to see how…

view full answer...

Answer 8

Hey Desirerme, so the Curt Echo #C51180 did have some initial problems when the switched it over to the OneControl app which was super annoying, but have you tried checking to see if they have a newer version of the app you can download? A lot of…

view full answer...

Answer 9

The Tekonsha #TK93VR is the correct brake controller harness for your vehicle. The connector that the TK93VR plugs into is located under the dash to the left of the steering column taped to another wiring harness near the emergency brake pedal. In…

view full answer...

Answer 10

Hey Brent, If your 2020 Jeep Grand Cherokee has the factory tow package then you'll be able to plug in the Pollak 5th Wheel / Gooseneck T-Connector #PK11893-33-32. It may be necessary to see a local Jeep dealer to activate the tow package wiring…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

The Curt Echo #C51180 works differently from a normal brake controller since it is wireless. In order to activate your trailer brakes, the Echo needs to detect that both the left and right brake lights are illuminated and that the vehicle is…

view full answer...

Brake Controller Wiring Harness Location 2017 Jeep Cherokee

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching