Recommended Boat Guide-Ons For 24-Ft Pontoon Boat

Question

Question:

I HAVE A 24foot PONTOON BOAT ,I WAS LOOKING AT THE 50, DO THEY MAKE THE FULTON BRAND IN BLACK AND SHOULD I CONSIDER THE 60inch INSTEAD ?

asked by: JERRY A

1

Helpful Expert Reply:

I recommend 60-inch Black guide-ons like the CE Smith, part # CE27646. I recommend going with the 60-inch because you can always cut the upright PVC to a shorter length if you wish.

If you decide on 50-inch, you can check out part # FGB1500100, which is only available in White.

expert reply by: Jeffrey L

1

Answer 1

Hey Thomas, we've got you covered. And I agree about TorkLift - they are always what I recommend as long as they're available for the truck. I'm not sure what the hitch situation is on your Tundra, but if you have the factory unit,…

view full answer...

Answer 2

Hello Jonathan, Great question. You are going to want the #RED98CR as it will be both the brake controller and the plug-n-play pigtail for the 2008 Toyota Tundra. The #RED82CR is just the brake controller by itself. Happy New Year! May 2025 be your…

view full answer...

Answer 3

Hello Tim, Are you asking if you can back up with just the head installed on the Weigh Safe True Tow Weight Distribution Hitch #WS79VR, when you put the trailer coupler onto the ball? If so, then yes because at that point it is really just a ball…

view full answer...

Answer 4

The best way to determine the height needed is to measure from the top of your trailer frame to the top of the sides of your boat. If the 40" Tall Guide-Ons #CE27626 sit right at or slightly above the sides of your boat then the shorter will…

view full answer...

Answer 5

Hey Justin, the CE Smith Post Style Guide Ons part #CE27635 that you referenced has corner brackets like you mentioned and not bent tube for the 90 degree turn. The one picture shows an outdated version of the guide ons and I just sent an update to…

view full answer...

Answer 6

Post-Style Guide-Ons for Boat Trailers, like #CE27646 are designed to help you load your boat onto your trailer. Because the rear of the trailer is backed into the water, it makes it really hard to see if you're loading it straight onto the…

view full answer...

Answer 7

We have exactly what you're looking for. You can use the CE Smith Post-Style Guide-Ons for Boat Trailers #CE27646 (black) or #CE27640 (white). Since your frame is 5" tall you will also need the Extra-Long U-Bolt Kit #CE11416.

view full answer...

Answer 8

A 205/75-14 tire is approximately 26.3 inches tall so for a cover I'd recommend the Adco Ultra Tyre Gard part number #290-3953 which is the size for 27 to 29 inch diameter tires and wheels. These covers are easy to install, will fit well, and…

view full answer...

Answer 9

The CE Smith #CE27620 Post-Style Guide-Ons will indeed fit your 2" wide x 3" tall frame member. The guide-ons will fit frame tubes up to 3" wide x 4-1/4" tall.

view full answer...

Answer 10

Yes, the CE Smith Post-Style Guide-Ons for Boat Trailers #CE27626 will help guide you onto your bunks of the boat trailer. These will adjust out 13" from your trailer frame and fit frames up to 3" wide x 4-1/4" tall. For frames up to…

view full answer...

Recommended Boat Guide-Ons For 24-Ft Pontoon Boat

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching