Length of Replacement Cable for Gorilla-Lift Tailgate Lift Assistant

Question

Question:

how long are the replacement cables for the gorilla tailgate lift

asked by: John

0

Expert Reply:

The entire cable to the end of each loop is about 57-1/4 inches. Between the clamps on each end before the loops is about 51-1/4 inches. The replacement cable for the Gorilla-Lift Tailgate Lift Assist # GL1 is # GLC1-Q1.

expert reply by: Charles S

0

Answer 1

When the suspension hangers, equalizers, and shackles are installed from a kit like the part #APT3 the goal is to have the leaf spring as level as possible. The different height hangers is offset by the height of the equalizer and shackles so that…

view full answer...

Answer 2

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 3

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 6

The determine the correct replacement leaf spring on your 2021 Coachmen 259FKDS you'll need to lift your trailer frame so the spring is hanging freely and then measure from center-eye to center-eye, then for the equalizer you need to measure…

view full answer...

Answer 7

Hey Bekzod, So while we don't have a way of knowing the exact leaf springs for your Arctic Wolf 5th wheel trailer, I can help you determine the correct replacements. You do have to take a measurement, though it's pretty easy, as all you need…

view full answer...

Answer 8

If you want the best, it's the MORryde Rubber Equalizers for Tandem Axle Trailers part #MR87ZR. These are the best as they offer the most travel which is basically how much that rubber bushing compresses and the more it compresses, the better…

view full answer...

Answer 9

Hey Darrel, we actually have exactly what you are looking for with the part #TRU52FR which is for a 7k axle and is 25-1/4 inch from eye to eye. This is also a 6 leaf spring as well. The spring you referenced would be too short.

view full answer...

Answer 10

There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're looking…

view full answer...

Answer 11

Yes, axle spread and wheel base by definition are the same measurements. You will measure from the center of one axle to the center of the 2nd axle to determine what you axle spread is. This may be difficult as some wheels and covers will make this…

view full answer...

Answer 12

Thank you for the images. The MORryde Rubber Equalizers #MR87ZR are the correct set for your 2020 Keystone Outback Ultra-Lite 291UBH. You will pair this with the MORryde Suspension Upgrade Kit #MR46ZR. Instead of using the wet bolts included with the…

view full answer...

Length of Replacement Cable for Gorilla-Lift Tailgate Lift Assistant

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching