Best Tie-Down Recommendation for a Pine Wood Floor Flatbed Trailer Carrying Motorcycles
Products Featured in This Question
Question:
I am looking for the Right tie down set up for my older trailer - it is a solidly made trailer, 55x12 in size. the frame was recycled/converted from an old travel trailer into a flat utility trailer,has large heavy duty 2 square steel frame members, covered with a new wood deck constructed of 2x10 pine boards, sealed with rubber undercoat. I will be hauling motorcycles, in wheel chocks. Want to install 8 tie down locations along the sides - 2 on the front and three on each side, set up about 3 apart - I am becoming confused about what tie down system would work the best for this trailer and my anticipated use - The boards completely cover the frame, and overlap by an inch or so. so I cannot weld tie downs directly on the frame unless I add tie down extension bars which I could do, should you recommend? - was originally thinking of installing something like LRB1 with long 4.5 zinced bolts attaching though holes drilled through the frame and the boards. then I got thinking maybe I should instead install something like this, with the mounting plate drilled through the wood decking and set Over/Around the steel frame members - thus avoiding the need to drill through the frame. do you have a preference? or a better suggestion?
asked by: Jeri
Expert Reply:
I think installing the Recessed Trailer D-Ring, # RR5K, that you have referenced, would be better than # LRB1, because the backing plate is going to help distribute the load from the ring which would be better for your wood decking and make for stronger connection points. If you use this kit with the backing plate an attachment to the frame is not required as the backing plate, which would be underneath the wood floor, would prevent the hardware from pulling out.
The only down side to installing these D-rings is 3-1/4 inch hole that has to be drilled in the wood so that the ring is properly recessed. But, once installed, it will have a flush, clean appearance. I think that for your application, this is going to be the best option and with the chocks you have mentioned, the bikes will be secure.
Product Page this Question was Asked From
Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs
- Tie Down Anchors
- Trailer Tie-Down Anchors
- Truck Tie-Down Anchors
- Tie-Down Cleats and Rings
- 1600 lbs
- D-Ring
- Surface Mount - Bolt-On
- Brophy
more information >
Continue Researching
- Q&A: Mounting Hole Spacing For Square D-Ring Tie-Down Anchor ABS69FR
- Shop: Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs
- Shop: Provider ST225/75R15 Trailer Tire with Black Vesper Mod Wheel - 6 on 5-1/2
- Shop: Square D-Ring Tie-Down Anchor - Bolt On - Square Holes - 6,000 lbs
- Video: Breaking Down the Bulldog Winch Trailer Winch
- Video: Feature Breakdown: InfiniteRule Lock for Demco eZ-Latch Trailer Couplers
- Search Results: trailer tongue lock
- Search Results: 225/75~15 trailer tires and wheels
- Video: etrailer Horizontal E Track Spec Review
- Video: All About the etrailer Horizontal E Track
- Article: How to Install E-Track in 3 Easy Steps
- Shop: Kenda Karrier ST225/75R15 Radial Trailer Tire with 15" Black Mesh Wheel - 6 on 5-1/2 - LR D
- Shop: Backing Plate for Brophy Recessed D-Ring Tie-Down Anchor
- Shop: Bulldog Winch Trailer Winch - Wireless Remote - Wire Rope - Roller Fairlead - 12,000 lbs
- Shop: Brophy Swiveling D-Ring Anchors w Backing Plates and Hardware - Bolt-On - 2,000 lbs - Qty 4
- Article: Where to Position the Trailer Axle?
- Video: Breaking Down the Replacement Gearbox for etrailer and Ram 2-Speed Square Jacks
- Search Results: wishbone
- Video: Complete Breakdown of the Rubber Bushing w/Steel Sleeve
- Video: All You Need to Know About the TecNiq Mini LED Trailer Fender Clearance Light
- Search Results: license plate light
- Search Results: tag light
- Search Results: e track
- Search Results: e track
- Article: Basics of Tie-Down Anchors
- Q&A: Replacement Tire and Wheel for Karavan Trailer 2990-72-12
- Q&A: Selecting a Replacement Spare Tire for Karavan Utility Trailer
- Q&A: Recommended Spare Tire and Wheel For Karavan 6 x 10 Utility Trailer KTO-2990-72-10
- Q&A: What is the Correct Direction of Pull for the Erickson E-Track
- Q&A: Tie-Down Recommendation for Bulldog Winch Ratcheting Wheel Tie-Down Strap
on Tie Down Anchors
