Fuse location in Honda Pilot 2016 for Tekonsha 3070-P Brake Control Wiring Adapter for Honda

Question

Question:

To enable Tekonsha Prodigy P3 Brake Controller in Honda Pilot 2016 using Tekonsha 3070-P Brake Control Wiring Adapter for Honda, which fuse need to be enabled and what is its location so that the 7 point setup I bought from you guys will work with braker controller. Thank you in advance for helping.

asked by: Pankaj B

0

Expert Reply:

Your Tekonsha Prodigy P3 # 90195, can be installed using the # 3070-P if you have a factory tow package. It attaches with a simple clip connection to a plug under the dash of your vehicle near the parking brake. It isn't always easy to find in the midst of the wiring. Check out the installation video I've attached for you. There is not an extra fuse needed in this installation.

expert reply by: Jason S

0

Answer 1

Sounds like your 2007 Honda Ridgeline has a factory 7-way installed in it. To install a brake controller in your vehicle all you will need is the correct install harness. If you went with a Tekonsha brake controller like the P2 part #90885 all you…

view full answer...

Answer 2

The Prodigy P2 #90885 is an excellent choice, being one of our most popular and easy to use brake controllers of all time. To install the brake controller, first look under the dash under the steering column over the brake pedal as shown in the…

view full answer...

Answer 3

The Tekonsha Plug-In Wiring Adapter item #3070-P you were looking at is confirmed to fit the newer Honda's with the tow packages. In order to use that on your 2022 Honda Pilot without the tow package you will need the T-One Vehicle Wiring Harness…

view full answer...

Answer 4

If your Ridgeline is equipped with the factory tow package, you can use the Tekonsha Wiring Adapter, part #3070-P to connect a controller. The presence of the factory 7-way trailer connector on the rear bumper is a sure indication that your Ridgeline…

view full answer...

Answer 5

There are 3 big differences between the Prodigy and the Prodigy P2, #90885, brake controllers. The most notable difference is the LED display is blue on the P2 where as it is red on the Prodigy. The second difference is that the P2 can be mounted at…

view full answer...

Answer 6

The included bracket with the Tekonsha Prodigy P2 Trailer Brake Controller #90885 is designed to mount using a machine screw with internal tooth washer, however there is no reason you cannot use a Velcro installation instead. The front of the Prodigy…

view full answer...

Answer 7

Yes, there is a port under the dash of your 2016 Honda Pilot for installing a brake controller like our best selling P3 part #90195. All you need is the install harness part #3070-P which is a confirmed fit. I attached an install video that shows…

view full answer...

Answer 8

All the brake controller needs to sense a trailer connection so that you can test it is a slight amperage draw on the output circuit. For that you can use a circuit tester like the part #PTW2993 with one pin grounded and the other on the output pin.…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Fuse location in Honda Pilot 2016 for Tekonsha 3070-P Brake Control Wiring Adapter for Honda

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching