Wiring Configuration for Trailer Side Marker Lights
Updated 11/30/2016 | Published 11/29/2016 >
Products Featured in This Question
Question:
there is a brown and a white wire coming out of the sidelight. I used a wire connector to attach both brown wires but not sure where the white goes .Is it a grounding wire? Do I drill a hole and attach a screw to wrap around it if so?
asked by: Tim
Expert Reply:
The usual configuration for 4-pole trailer wiring has the WHITE wire as GROUND, the BROWN wire as RUNNING LIGHTS, the YELLOW wire as LEFT TURN/STOP and the GREEN wire as RIGHT TURN/STOP. If your light has white and brown wires coming out of it then typically the brown wire would connect to the + side of the running light circuit and the white wire would ground to the trailer frame, or could be run up to the trailer plug's ground. One way or the other the light must have a ground and a + connection.
If you want to ground the light to the trailer frame you can use a self-tapping screw like # 1131832. Make sure the ground point is clean bare metal and if you want to you can apply dielectric grease # 11755 to help protect that ground connection from dirt and moisture that could cause corrosion.

Product Page this Question was Asked From
16 Gauge, 4 Conductor Bonded Parallel Wire - Per Foot
- Wiring
- Wire
- Bonded Wire
- 4 Wire
- 16 Gauge
- Deka
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Stromberg Carlson Chock Wheel Stabilizers for Tandem-Axle Trailers and RVs - Qty 2
- Shop: SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet - Qty 6
- Shop: Fastway ONEstep Wheel Chocks for Tandem-Axle Trailers and RVs - 16" to 24" Long - Qty 2
- Video: Fastway ONEstep Tandem Axle Wheel Chock Review
- Shop: TorkLift Camper Tie-Downs - Custom Frame Mount - Front
- Shop: TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
- Shop: Camper Tie-Downs
- Q&A: Standard Color Code for Wiring Simple 4 Wire Trailer Lighting
- Q&A: How to Wire Trailer Lights That Have Yellow and White Wires
- Q&A: Wiring in Amber Side Marker Trailer Lights that have Black and Yellow Wires
- Shop: Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
- Article: Trailer Wiring Diagrams
- Q&A: 7-Way Trailer Plug Adapter or Compatibility with Lance Slide-In Truck Bed Camper
- Search Results: trailer hitch
- Shop: Suspension Enhancement
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: How to Mount a Truck Bed Camper
- Video: A Closer Look at the HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Search Results: camper tie~downs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Video: Breaking Down the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs
- Search Results: trailer wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Gooseneck Hitch
- Video: Mount: TorkLift Tie Downs on a 2022 Ford F-250 Super Duty
- Shop: Brake Controller